Water/meth Placement

Kpblownfox

Member

Jun 8, 2016

53

18

18

Maryland/Delaware

Apr 25, 2017

#1

• Apr 25, 2017

• #1

I'm looking to install a water/meth kit soon to combat my 200+ degree AIT's. my question is where have you guys had the most success placing the nozzles? I have a GM style air temp sensor about half way up my charge pipe and I'm concerned about the water\meth affecting the senor. Any advice is appreciated

 

D

Deleted member 215073

Apr 25, 2017

#2

• Apr 25, 2017

• #2

You can put the nozzle close to the throttle body. The instructions for the water meth kit should tell you how far from the throttle body it should be.

 

Kpblownfox

Member

Jun 8, 2016

53

18

18

Maryland/Delaware

Apr 25, 2017

#3

• Apr 25, 2017

• #3

Problem I have is my air intake sensor is before my throttle body in the charge pipe so I have to spray before the sensor so I can actually see the change in temp and there for time for those temps. I'm just wondering if spraying the mixture that close to the temp sensor will give me false readings on temps

 

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,739

6,721

214

Hillsborough county

Apr 25, 2017

#4

• Apr 25, 2017

• #4

I don't think it will cause an issue.

What are you tuning with?

 

Kpblownfox

Member

Jun 8, 2016

53

18

18

Maryland/Delaware

Apr 25, 2017

#5

• Apr 25, 2017

• #5

Tuning with mega squirt

 

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,739

6,721

214

Hillsborough county

Apr 26, 2017

#6

• Apr 26, 2017

• #6

...Oh yeah. .... lol.. how's that coming along?

Either way the meth is going to skew the afr, best way to approach this is to set up table switching.

When the meth comes on use an input that can be configured for table switching. (Usually the input is pulled to ground) this way you can tune for meth on just this extra table.

Good luck let me know if you need help setting it up.