Water Pump Bolt Broke Off Inside (with Pictures)

Noobz347 · Sep 19, 2013

j0rd4n said:
well apparently the regular tap for a 3/8 bolt and the tap for the 3/8 helicoil must not be far off because somehow i threaded in the insert perfectly then the oiriginal 5/16 bolt torqued down just fine. me and my brother did one last "Hoo-rah" today and now the car is back together running perfectly with no water leak.

i dont see the big deal?

It's not that it's necessarily a big deal. It's more that the majority of us have either been there, or barely dodged that bullet and kissed the ground because of it. LOL

jrichker · Sep 19, 2013

Noobz347 said:
There's a couple of things you can do here. One is find a stepped stud in SAE size and thread. Good luck with that one because they seem to be getting harder and harder to find.

The other thing you can do is buy a short length of STAINLESS all-thread and cut the smaller end yourself.

Thread-lok Blue, would a good addition to the threads going into the block with either of these options.

If you have a drill press and a file you can make your own stepped stud. I have done it, but it takes a lot of care and measuring to get it right. Chuck the treaded stud in the drill press, turn the drill press on and go at the stud with a file. It takes a sharp eye and a micrometer or very good dial caliper to get the diameter right. Then tread the reduced portion with the correct size die and you are done.

mikestang63 · Sep 19, 2013

j0rd4n said:
well apparently the regular tap for a 3/8 bolt and the tap for the 3/8 helicoil must not be far off because somehow i threaded in the insert perfectly then the oiriginal 5/16 bolt torqued down just fine. me and my brother did one last "Hoo-rah" today and now the car is back together running perfectly with no water leak.

Congratulations on dogding a bullet. We've all had that one OH CRAP moment at least once in our lives working on cars.

PLEASE tell me you coated that bolt in antisieze. I would have also preferred a SS bolt.

j0rd4n · Sep 19, 2013

Noobz347 said:
There's a couple of things you can do here. One is find a stepped stud in SAE size and thread. Good luck with that one because they seem to be getting harder and harder to find.

The other thing you can do is buy a short length of STAINLESS all-thread and cut the smaller end yourself.

Thread-lok Blue, would a good addition to the threads going into the block with either of these options.

mikestang63 said:
Congratulations on dogding a bullet. We've all had that one OH CRAP moment at least once in our lives working on cars.

PLEASE tell me you coated that bolt in antisieze. I would have also preferred a SS bolt.

haha thanks i appreciate everyones help. please dont think what you said fell on deaf ears. im just so novice it seems i overlook a lot of things and then ending up learning them myself even when someone has already told me.

yes i did antisieze it for now although by october its gonna be stored for the winter and completely torn down and rebuilt. its only my DD until snow hits.

my brother wants to completely rebuild it with me... hes the master mechanic not me lol. i did this in a bind because my brother is using my only other vehicle because his is now a paper weight and he was too busy for the last two weeks to help me.

thanks for everyones help i learned a TON

Grabbin' Asphalt · Sep 19, 2013

j0rd4n said:
haha thanks i appreciate everyones help. please dont think what you said fell on deaf ears. im just so novice it seems i overlook a lot of things and then ending up learning them myself even when someone has already told me.

yes i did antisieze it for now although by october its gonna be stored for the winter and completely torn down and rebuilt. its only my DD until snow hits.

^^^^ we've all had our Chernobyl Disaster Meltdown!!!

1200gt said:
This is amazing!!!! The Pro's 2 -vs- The Grimlins 10!

^^^^Funny @ss sh!t right there!!! Glad we can laugh about it now

Mikey1968 · Oct 1, 2013

I went through nearly the exact same thing on my 89....did the oversized bolt but I think it was on the timing cover only as I did the water pump and chain at the same time. Had the help of a machinist buddy who came over and helped.

You gave me bad flashbalcks!

nesnej · Apr 15, 2019

Similar issue to this but mine broke on a bolt/stud that goes to the ps pump. It broke at the place the threads start so mine is probably 4" in the engine. thoughts on how to approach a break like that? I don't see how to get a bit in that far without causing other issues. This is the stupidest design and lack of thought of metal compatibility [automotive engineer being slapped int he background]. any help is appreciated.

Water Pump Bolt Broke Off Inside (with Pictures)

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

jrichker

StangNet's favorite TOOL

mikestang63

j0rd4n

Member

Grabbin' Asphalt

Mikey1968

Member

nesnej

New Member

Similar threads

Water Pump Bolt Broke Off Inside (with Pictures)

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

jrichker

StangNet's favorite TOOL

mikestang63

j0rd4n

Member

Grabbin' Asphalt

Mikey1968

Member

nesnej

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency