• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

water pump question

  • Thread starter Thread starter noslow86
  • Start date Start date May 1, 2005
N

noslow86

New Member
Dec 30, 2003
68
0
0
sandwich il
May 1, 2005
#1
  • May 1, 2005
  • #1
will a high flow water pump run my engine cooler? i have a stock one in there now but i have a new radiator,180 stat, and new heater core put in last year .and it reads over half on the gauge i already switch gauges ,temp sending unit,volt regulator and i smell antifreeze after i drive, it has a very small leak. what should i do
 

jwzg

Member
Apr 6, 2004
237
0
16
Prattville, AL
May 1, 2005
#2
  • May 1, 2005
  • #2
Get a remanufactored or new unit from Auto-Zone with a lifetime warranty, unless you have a gazillion $$$ in your engine.

I don't recommend a high-flow pump unless you have a three core radiator with more coolant capacity. If it's pushing too much volume, the coolant mix won't stay in the radiator long enough to get cool. JMHO. FWIW, I tried this with the Cobra overdrive wp pulley AND the a high flow pump.... It blew off the upper radiator hose on the first whack of the throttle, and spewed water everywhere. LOL Gotta love cast iron heads...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 1, 2005
#3
  • May 1, 2005
  • #3
i also am not a fan of high flow pumps. if a new one is cheap, go for it (i am also not a huge fan of reman'd units, but i think it is luck of the draw with about any pump). Stewart makes nice pumps and they are not too much $$, IIRC.
 
N

noslow86

New Member
Dec 30, 2003
68
0
0
sandwich il
May 1, 2005
#4
  • May 1, 2005
  • #4
reply

is it normal for it to read over half on the gauge when i used i 160 stat it barely went up. now i got 180 stat and it reads over half already change a crap load of parts will a new water pump run it cooler
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 1, 2005
#5
  • May 1, 2005
  • #5
i would really want a real gauge first. who knows what you are really running at. water pumps generally dont fail or lost that that much performance (impeller shaft breaks are rare).

my two cents. good luck.
 
You must log in or register to reply here.

Similar threads

Engine 1986 GT Overheating issues
  • 86 5O GT
  • Jan 25, 2026
  • Fox 5.0 Mustang Tech
Replies
18
Views
678
Fox 5.0 Mustang Tech Jan 29, 2026
86 5O GT
Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
776
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
D
Engine Coolant and Radio Issues
  • Don7Up
  • Sep 14, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
656
Fox 5.0 Mustang Tech Oct 4, 2025
Don7Up
D
Fox Help
  • 93fox85
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
223
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 23, 2026
Noobz347
B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?