Weld Prostar 15x8 wheels VS studs??!!

Xcessiv · Feb 14, 2006

Hi!

I just bought a set of 15x8 Prostars that I'm going to put on my stock rear end for drag use. Do I need to install 3" studs or if it's just necessary for 6.5" bs ones (15x10s)? If I still need to install 3" studs and I don't, is it dangerous on ET Drag slicks?

Thanks for your help, it's appreciated.
Regards.

CobraM23 · Feb 14, 2006

You can run the stock studs. You just need shank style lug nuts. 1/2" x 20RH, 1.380" shank length, .685" lug nut shank diameter. You can get them in either open or closed end at Summit. Hope I helped.

QDRHRSE · Feb 14, 2006

It depends. Any NHRA sanctioned track wont let you run a slick or DR unless the stud comes out past the lug nut. This also means that you have to have open ended lugs. If you plan on going to a track you will need long studs.

Weld Prostar 15x8 wheels VS studs??!!

Xcessiv

Member

CobraM23

QDRHRSE

New Member

Similar threads

Weld Prostar 15x8 wheels VS studs??!!

Xcessiv

Member

CobraM23

QDRHRSE

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency