Well doing the Foxbody conversion.

[FordStang]

as we all went over this subject many times im finally going to do it. Talked to Oink he said i need t/b, 3/8s EGR spacer, bracket, throttle Cable and TPS Plug. Does this all sound right because i wanna get going on this. thanks guys

Oh and also my FMS 65mm t/b is for sale along with Eddy Elbow

 

[GTJake]

Yep. Get both the male and female ends of the TPS plug so that you can still have a connector instead of just a hardwired TPS plug. Then you don't have to reset the TPS everytime you want to take off the TB or upper.

Jake

 

[FordStang]

where can i find a FMS 65mm t/b online cheap?

 

[OinkAodeOink]

dude..

poweredbyford has cheap prices on almost everything.

You will only need the female conector off a 5.0 EFI car, since the Male conector already comes on the FMS t/b. Shi*, maybe its the male conector.. either way, youll only need one

 

[cardudeusa]

What exactly is a foxbody conversion??? Sorry, dont have any experience with 94+.

 

[FordStang]

Its eliminating the Elbow Piece that is in between the t/b and intake.

 

[BlackVert]

is it true the fox tb conversion doesn't have anywhere to hook up the cruise control?

 

[OinkAodeOink]

no one has really tried to hook up cruise... Im sure it could be done with alittle creative thinking

 

[RIO5.0]

Check this ongoing link at Corral...I has some info on pages 3 and 4 regarding the cruise control...
http://www.corral.net/forums/showthread.php?s=&threadid=427228

If you need an EGR spacer, give me a yell...I have a new UPR one for a 65mm TB...I orginally ran an Explorer upper and needed it (to hook up your throttle cable bracket) I swap over to a 93 Cobra upper....you dont need the EGR spacer as the holes for the bracket are all ready in the upper casting...I aslo have an extra FMS 65 TB to boot with the TPS, it needs an IAC valve though....pm me if your interested...

This is what you need for the swap...

 

[mytight95]

can you e-mail me a price to [email protected], on that TB. I have a trick flow elbow, but i think i am gonna smooth that out don't want trick flow adapter with a eddy intake.


jason

 

[cardudeusa]

Its eliminating the Elbow Piece that is in between the t/b and intake.

Oh, ok.