Welp This Is Going To Be Hard For Me...

srtthis · Apr 1, 2014

going to sell my LX...

just dont have the time for it anymore
some ones going to get a hell of a deal on a fast car

going to go with
88 LX
QA1 tubular K member
QA1 custom valved coil overs
strange 10 ways with UPR coil over kit
UPR billet CC plates
SN95 fan
GT40 heads with 5 angle valve job, polished chambers, ported, springs
1.72 roller rockers
B303 cam
moroso ultra 40 wires
msd coil
msd 6AL2
summit pro star knock offs
3inch studs
pro products balancer
ported exploder lower intake
ported exploder upper
blended 65mm throttle body
C&L inlet pipe
C&L mass air for 24lb injectors
GT40 nitrous plate kit
NX purge plumbed out of the antanna hole
stainless hard brake lines
Line lock
rear mounted battery
SFI flex plate
custom made billet C4 converter
full manual C4 with trans brake... kevlar bands red clutchs 6 pinion planetary all the goodies
mac long tube headers
drive shaft loop
custom built rear
8.8 bolt pattern ends with 9" bearings
custom made moser axles
moser spool
3" studs
UPR pro adjustable lower control arms
UPR radius arm uppers
UPR torque box plates
welded torque boxes
SVT focus pump (bigger then a 255lph)
lakewood 50/50's
4cyl springs
200mph saleen speedo
weld pro star rears with 275 mickey pros

im thinking 5K but i gotta see how far im into it...

Bullitt347 · Apr 1, 2014

That is a hell of a deal. To bad you have to sell it. And as with all projects one never gets $ for $ value out of them. Just don't add up the hrs you spent on it, that will get you real depressed in a hurry.

srtthis · Apr 1, 2014

Bullitt347 said:
That is a hell of a deal. To bad you have to sell it. And as with all projects one never gets $ for $ value out of them. Just don't add up the hrs you spent on it, that will get you real depressed in a hurry.

ive always said i will never add up how much money or time i have in any of my cars. cuz i will just end up drinking more. i honestly didnt realize i had as much done to this thing as i did

Bullitt347 · Apr 1, 2014

Yea, I made that mistake once, even added up how much $ I would have spent just paying myself minimum wage....YIKES! It is to the point I don't even keep track of how much I spend on tools (except at tax time). Way to depressing.

84Ttop · Apr 1, 2014

Sorry to hear this! What's with the sudden change of heart about the car? Or is this something you've been considering for a while?

David Pepiton · Apr 1, 2014

first off wrong section! and second great April fools.

elarm1 · Apr 1, 2014

Good one! you had me going!

srtthis · Apr 1, 2014

damn... thought this could go on a bit further.

and no im not selling the car. well not unless some one offers me stupid amounts of money for it

RangerJoe · Apr 1, 2014

Man, I was fixing to tell you not to do it!

Joe

David Pepiton · Apr 1, 2014

man such suckers. I saw that coming just seeing the title.

A5literMan · Apr 1, 2014

I was like And then looked at the date on the post. Thought you might be yanking us around. Glad you were joking

Noobz347 · Apr 1, 2014

srtthis said:
damn... thought this could go on a bit further.

and no im not selling the car. well not unless some one offers me stupid amounts of money for it

What a noob.

All for ban, say "aye".

madspeed · Apr 1, 2014

Aye, anyone thats been around knew that was foolery

srtthis · Apr 1, 2014

srtthis · Apr 1, 2014

madspeed said:
Aye, anyone thats been around knew that was foolery

truth!
i have no issues just letting it sit in the garage till i have time to work on it and drive it

84Ttop · Apr 1, 2014

Jerk....I hope I ruined your lunch with the tacos in the other thread!!

madspeed · Apr 1, 2014

Well it is Taco Tuesday after all

7upstang91 · Apr 1, 2014

At first I felt bad knowing how much work you had in the car, then I started to crunch numbers in my head to justify buying another mustang. Ya jerk. I had to do unnecessary math.

NIKwoaC · Apr 1, 2014

Man I almost had a buyer lined up, too.

MikeH686 · Apr 1, 2014

madspeed said:
Well it is Taco Tuesday after all

It's taco day every day

Welp This Is Going To Be Hard For Me...

srtthis

the guy doing it does every local racers rear end

Bullitt347

I have been doing it wrong this whole time

srtthis

the guy doing it does every local racers rear end

Bullitt347

I have been doing it wrong this whole time

84Ttop

They make new pistons every day, so why worry?

David Pepiton

Active Member

elarm1

srtthis

the guy doing it does every local racers rear end

RangerJoe

I leave the horn on while driving

David Pepiton

Active Member

A5literMan

At least it is lumpy...

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

madspeed

Colonel Mustard

srtthis

the guy doing it does every local racers rear end

srtthis

the guy doing it does every local racers rear end

84Ttop

They make new pistons every day, so why worry?

madspeed

Colonel Mustard

7upstang91

NIKwoaC

中國製造

MikeH686

Mine is only two inches though.

Similar threads

Welp This Is Going To Be Hard For Me...

the guy doing it does every local racers rear end

I have been doing it wrong this whole time

the guy doing it does every local racers rear end

I have been doing it wrong this whole time

They make new pistons every day, so why worry?

Active Member

the guy doing it does every local racers rear end

I leave the horn on while driving

Active Member

At least it is lumpy...

Stangnet Facilities Maint Tech... Er... Janitor

Colonel Mustard

the guy doing it does every local racers rear end

the guy doing it does every local racers rear end

They make new pistons every day, so why worry?

Colonel Mustard

中國製造

Mine is only two inches though.

Similar threads

Privacy & Transparency

Privacy & Transparency