DMAN302
My mom says thanks for the pearl necklace.
I would guess with the timing at or near 16deg and the cooler temps you have another 10HP at the wheels just waiting to be taken advantage of.
Went to the Dyno Today
- Thread starter 1988WHTGT
- Start date
Paul Perreca
New Member
- Mar 30, 2005
- 1,085
- 0
- 0
Paul Perreca
New Member
- Mar 30, 2005
- 1,085
- 0
- 0
Dbeck002
New Member
My bad i meant 3924s, im really tired, finals coming up...
I use those with the AFR165s and TFS1 cam, GT40E upper.
302 rwhp/331 rwtq, A/F was rich at 12.8 i bet i could pick up 10 RWHP by just tuning to 13.5 and some more timing. oh and i want a holley manifold and a pro-m meter, that should net me 320 at the wheels.
I use those with the AFR165s and TFS1 cam, GT40E upper.
302 rwhp/331 rwtq, A/F was rich at 12.8 i bet i could pick up 10 RWHP by just tuning to 13.5 and some more timing. oh and i want a holley manifold and a pro-m meter, that should net me 320 at the wheels.
payupsucka
Member
i made 276 315 with a stock block tfs tw heads e cam and a cobra intake with a 65 mm tbody and a 70 mm mass air sensor stock fuel injectors the normal exhuast upgrade and pulleys and everyone says my numbers are low cuz of my intake maybe you have the same dilemma as me
Paul Perreca
New Member
- Mar 30, 2005
- 1,085
- 0
- 0
i think it is ur injectors man - not ur intake - the cobra intake is good up to 350 or somethin - but many a person has gone well into 300 HP w/ a cobra intake -
DMAN302
My mom says thanks for the pearl necklace.
Don't get too caught up in the numbers part of it, sounds like a great combo. Just do like everyone else seems to do when asked about the output of their cars....lie..
Paul Perreca
New Member
- Mar 30, 2005
- 1,085
- 0
- 0
i think those numbers are right on, if that was me i wouldnt be dissapointed especailly with the torque. those are good numbers off of a 302 with an E-cam. my car made 265 at the wheels and i was a little dissapointed... then i put a blower on it.
Similar threads
