• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Wet or Dry Nitrous?

  • Thread starter Thread starter $uperstang
  • Start date Start date Aug 22, 2005

$uperstang

New Member
Jul 20, 2004
476
1
0
Detroit, MI
Aug 22, 2005
#1
  • Aug 22, 2005
  • #1
Just need some suggestions. If I was going to stay with my current set-up. Would it be better to go with a Dry Kit as opposed to Wet? What is the major difference between the two? What do some of you recommend, I was planning on a like a 75-100HP shot just for some added ET improvements?
 

SpeedDensityET

New Member
Mar 30, 2005
10
0
0
Aug 22, 2005
#2
  • Aug 22, 2005
  • #2
Yeah, I've been wondering about this one myself. The dry kit sounds easier to install, because it gets extra fuel from jacking up the fuel pressure to the injectors. The wet kit sounds safer because it doesn't involve high fuel pressures and potential variances in fuel delivery from different pumps. But then again, the wet kit looks like its bar would be an intake restriction when running on the motor. Anybody have any experience with these?
 

QDRHRSE

New Member
Dec 31, 2002
1,590
0
0
Palmdale, CA
Aug 22, 2005
#3
  • Aug 22, 2005
  • #3
I used to be a super wet kit advocate but not anymore. A well planned dry kit is the way to go. You jst need to make sure you have enough injector and fp for your unit and your set. My wet kits had problems with, puddling, backfiring, and running crappy with a low bottle. I had one of those nos 5115 kits (I think that's the #) and it worked flawlessly.
 
3

331 stang91

Member
Oct 16, 2004
261
0
16
wisconsin
Aug 22, 2005
#4
  • Aug 22, 2005
  • #4
Did anyone ever have one of those sneeky peat dry kits. Ver small shot and small tank. I'f so what were your 1/4 mile time improvements?
 
F

fiveohGT

New Member
Jun 22, 2004
353
1
0
Fairfax Virginia
Aug 22, 2005
#5
  • Aug 22, 2005
  • #5
I would suggest a performer rpm intake and the edelbrock performer rpm nitrous kit. It uses a spary bar plate between the upper and lower manifolds making it so each cylinder is tunable. I think it's the best design there is. Plus you need to upgrade from that cobra intake with that stroker and those heads.

No matter what you do make sure you get it TUNED!
 
F

fiveohGT

New Member
Jun 22, 2004
353
1
0
Fairfax Virginia
Aug 22, 2005
#6
  • Aug 22, 2005
  • #6
I'm not sure what you mean by sneeky peat. Edelbrock also makes a concealed nitrous system. Which is pretty much just a 12oz bottle that can be hidden anywhere, and no one will ever have to know you're "cheating." Especially with the spray bar plate.
 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Aug 22, 2005
#7
  • Aug 22, 2005
  • #7
dry, unless the nozzle is mounted in the lower manifold like a direct port or the edelbrock kit mentioned. i say this as a wet kit sprayed into the upper has to negotiate several bends and has the tendency to puddle and make big boom.
 

giddyup306

Founding Member
Oct 22, 2002
3,041
2
59
Aug 22, 2005
#8
  • Aug 22, 2005
  • #8
If you have to ask a dry kit is probably in your favour. Holley has a very nice FAQ on there site.
 

giddyup306

Founding Member
Oct 22, 2002
3,041
2
59
Aug 22, 2005
#9
  • Aug 22, 2005
  • #9
fiveohGT said:
I'm not sure what you mean by sneeky peat. Edelbrock also makes a concealed nitrous system. Which is pretty much just a 12oz bottle that can be hidden anywhere, and no one will ever have to know you're "cheating." Especially with the spray bar plate.
Click to expand...
http://cgi.ebay.com/ebaymotors/NOS-...33740QQitemZ7994114563QQrdZ1QQsspagenameZWDVW
 

giddyup306

Founding Member
Oct 22, 2002
3,041
2
59
Aug 22, 2005
#10
  • Aug 22, 2005
  • #10
QDRHRSE said:
I used to be a super wet kit advocate but not anymore. A well planned dry kit is the way to go. You jst need to make sure you have enough injector and fp for your unit and your set. My wet kits had problems with, puddling, backfiring, and running crappy with a low bottle. I had one of those nos 5115 kits (I think that's the #) and it worked flawlessly.
Click to expand...


If your making big shot HP you will be running grossly over rich under daily driving conditions.
 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Aug 22, 2005
#11
  • Aug 22, 2005
  • #11
giddyup306 said:
If your making big shot HP you will be running grossly over rich under daily driving conditions.
Click to expand...
afm sells a 250-up dry kit with a pms. it can and is being done, albiet at a much greater price than a homemade direct port.
 
F

fiveohGT

New Member
Jun 22, 2004
353
1
0
Fairfax Virginia
Aug 22, 2005
#12
  • Aug 22, 2005
  • #12
giddyup306 said:
http://cgi.ebay.com/ebaymotors/NOS-...33740QQitemZ7994114563QQrdZ1QQsspagenameZWDVW
Click to expand...
Thats an interesting kit. The kit says that it is for use on carburetors only. What would be needed to make sure you had a enough fuel when you randomly decided to hit the botton on the go? Some kind of chip with a switch on it that can switch fuel pressure/tunes or just a fuel pressure switch? In other words, how can you safely run this kit?
 

giddyup306

Founding Member
Oct 22, 2002
3,041
2
59
Aug 22, 2005
#13
  • Aug 22, 2005
  • #13
fiveohGT said:
Thats an interesting kit. The kit says that it is for use on carburetors only. What would be needed to make sure you had a enough fuel when you randomly decided to hit the botton on the go? Some kind of chip with a switch on it that can switch fuel pressure/tunes? In other words, how can you safely run this kit?
Click to expand...


Yes it is. I almost put one on a 5hp B&S. Beleve me you can fab it up to work with FI. I had a holley quadrajunk plate on a friggin Celebtity...... They go for around $50 on Ebay used.


Most cars run far to rich at WOT. I would not worrie about running extra fuel. Especially with that kit. If you want more info PM me.
 

giddyup306

Founding Member
Oct 22, 2002
3,041
2
59
Aug 22, 2005
#14
  • Aug 22, 2005
  • #14
bimmertech said:
afm sells a 250-up dry kit with a pms. it can and is being done, albiet at a much greater price than a homemade direct port.
Click to expand...
A 250 dry kit eh? For some reason I don't like the sound of it. I'm sure you'd have to upgrade the fuel pump.......
 

camarokiller5.0

New Member
Nov 3, 2004
48
0
0
Dallas
Aug 23, 2005
#15
  • Aug 23, 2005
  • #15
i run a nitrousworks wet kit with a 150 shot with no prob. no backfiring or puddling, run it at the track at least 4 times every week, timing set at 8, two step coolder plugs(autolite ar94s), hobbs fuel pressure safety switch, paid $350 on ebay, wet or dry you wont go wrong good luck to you!
 

$uperstang

New Member
Jul 20, 2004
476
1
0
Detroit, MI
Aug 23, 2005
#16
  • Aug 23, 2005
  • #16
What about the Zex Dry kit that is the one I was looking at? I beleive it is a 100hp shot?
 

SpeedDensityET

New Member
Mar 30, 2005
10
0
0
Aug 23, 2005
#17
  • Aug 23, 2005
  • #17
I've heard nothing but satisfaction with the Zex dry kit. Only downside is that it only goes from 75-125, but I hear of many going up to 150 using nitrous express jet sizes (although going up to 150 is not recommended by Zex). Anybody know which NX jets will take the Zex kit up to 150? I've been thinking of purchasing this one myself if it'll work up to 150.
 
S

slitherin' 03

New Member
Aug 25, 2005
43
0
0
Aug 26, 2005
#18
  • Aug 26, 2005
  • #18
zex on an 03 COBRA?

Thinking of going with a zex system on my 03 cobra? Any sugestions/comments?
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Aug 26, 2005
#19
  • Aug 26, 2005
  • #19
I've had both, I prefer a dry kit.
 

fastimes69

Founding Member
Jun 27, 2001
188
0
17
San Benito, Texas
Aug 26, 2005
#20
  • Aug 26, 2005
  • #20
I had the NOS 5115-2 (stage 2 ) Dry kit and used a 175 shot and my car ran 11.70's. I sold that kit and bought a Cold Fusion Nitrous wet kit with 15lb bottle and is adjustable up to 200 shot. It feels the same as the dry kit to me, no difference. I tried the 200 shot but my car would not hook even with slicks, I would spin 1st gear off the line a little bit(don't know why), guess I need suspension work now!!!. I would just go with a dry kit, it's just as good as a wet kit IMO!! I ran the same times with both kits!!!!
 
You must log in or register to reply here.

Similar threads

Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
971
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
5
Foxbody Intro
  • 5.0Sucio
  • May 26, 2026
  • The Welcome Wagon
Replies
1
Views
199
The Welcome Wagon May 26, 2026
Noobz347
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
311
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?