I'll let you know how it is when I get it up and running the T5 is out now but I need to pick up a few more odds and ends before the C4 can go back in.
I'll let you know how it is when I get it up and running the T5 is out now but I need to pick up a few more odds and ends before the C4 can go back in.
Good trans thread. I am thinking of putting my TKO 500 up for sale and using what I get and putting it towards a really good C4 or something. My setup being full drag, planning on a 427W nitrous motor might be hard to get any consitancy with a manual.
I would like one with a good stall, manual valvebody, trans break and all the goodies.
Good trans thread. I am thinking of putting my TKO 500 up for sale and using what I get and putting it towards a really good C4 or something. My setup being full drag, planning on a 427W nitrous motor might be hard to get any consitancy with a manual.
I would like one with a good stall, manual valvebody, trans break and all the goodies.
I bought their low gear planetary, Split it into two pieces on the first hard 1-2 shift. I will NEVER buy from them again. I bought the majority of my stuff from summit. PA hardened input shaft, six pinion planetary, Hughes performance overhaul kit and pan. I would recomend a trans temp gauge too. Just me.
Mike.
my convertor i sa 3500 so I was told I need to flush it out since there was a ton of debris in the trans I'm sure it will be in there too. I could use some help figuring out where I put the dip stick and fill tube I picked up from AE I don't see any holes for this on my trans.
bluevenom867 said:
Good for you.
I would like to hear how it comes out,btw you got a converter yet?
my convertor i sa 3500 so I was told I need to flush it out since there was a ton of debris in the trans I'm sure it will be in there too. I could use some help figuring out where I put the dip stick and fill tube I picked up from AE I don't see any holes for this on my trans.
been doing some research and I beleive it is pan fill. I think I have the wrong fill tube for my application and also need some fittings here is a link to my thread on this http://www.revxtreme.com/forums/showthread.php?t=15401
thanks for your help guys