What else do I need with Bullit suspension?

[swingline]

I am picking up the kit from Gene Evans and I need to know what else I am going to need. Do I need caster/camber plates or is the drop not large enough to justify their expense? I will be getting subframe connectors from Maximum Motorsports too. Who makes good LCA's? Basically I am want to get my suspension for my 'vert done before summer.

 

[zenboy99]

You might want to pick up some isolators too, I think they're only $20. Mine were shot when I put my supsension stuff on. I went with Bullit shocks/struts and Steeda Sport springs, I have some pretty bad inner tire wear on the front wheels. Make sure you get caster camber plates or a good alignement.

 

[swingline]

Do you think that LCA's are needed then since I am not making a lot of power and won't be going to the track? What about offset rack bushings? Thanks for reminding me about the isolators, I forgot about them.

 

[rio95]

lca's are def. not needed, but they would be nice. x2c has some upper and lower control arms right now for $149 for all. thats a good deal. they just aren't aluminum, so some people might say they suck b/c they might weigh an extra .5 pound.

 

[zenboy99]

You don't need LCA's but they are a nice mod from what I've heard. Steeda has a steel LCA for ~$169, or you can get the aluminum for $189