What engine builder should I go with?

NIKwoaC · Mar 17, 2012

VibrantRedGT said:
NikwoaC
Oh, I thought you wanted to buy the book.

The MAF and TB flow numbers were done on a SuperFlow 600 Airflow bench.

What I'm looking for is how much vacuum was used, did they flow test it with a filter, etc, so I can get a more accurate comparison againt the 97mm Abaco.

NIKwoaC · Mar 19, 2012

VibrantRedGT

VibrantRedGT said:
NikwoaC
Oh, I thought you wanted to buy the book.

The MAF and TB flow numbers were done on a SuperFlow 600 Airflow bench.

NikwoaC said:
What I'm looking for is how much vacuum was used, did they flow test it with a filter, etc, so I can get a more accurate comparison againt the 97mm Abaco.

Bueller?

VibrantRedGT · Mar 19, 2012

NikwoaC

I forgot the book at home. I left it out on the counter so I wouldn't forget but I did anyway. I'll post it tonight. I did see they tested quite a few with Filter.

VibrantRedGT · Mar 19, 2012

NikwoaC

Ok Nic, I have the book in front of me. Ask away.

All the meters tested at Extrude Hone with Flow Rate @ 28in on Superflow 600. Testing with air filter knocked off almost 200cfm.

Stock 5.0 MAF 58mm- 606cfm
Cobra 70MM- 815cfm
Pro-M 75MM Bullet- 964cfm
C&L 73MM- 1171cfm
C&L 80MM- 1415cfm, w/ filter 1254cfm
Ford 80MM- 1017cfm, w/ filter 988cfm
Powertrain 80MM (removed bar) 1368cfm, w/ filter 1313cfm
Pro-M 77MM Shorty- 1543cfm, w/ filter 1360cfm
Pro-M 77MM Standard- 1562cfm, w/ filter 1377cfm
Pro-M 80MM- 1598cfm, w/ filter 1377cfm

NIKwoaC · Mar 19, 2012

Ah, OK, that makes more sense now. I was going to be blown away if the Pro-M 80 flowed more than the 97mm Abaco, but between the higher vacuum and the lack of an air filter, it makes sense now. I'd be curious to see the Abaco flowed along side those others under the same conditions.

89stang1 · Mar 20, 2012

FastDriver said:
A trade offer? I have a slightly used soul up for trade...

hmmmm

hoopty5.0 · Mar 20, 2012

Probably have better luck trading lightly used underwear?

I'm just jealous, I don't have one...

What engine builder should I go with?

NIKwoaC

中國製造

NIKwoaC

中國製造

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

NIKwoaC

中國製造

89stang1

Stroked and Juiced

hoopty5.0

mechanicus terribilis

Similar threads

What engine builder should I go with?

NIKwoaC

中國製造

NIKwoaC

中國製造

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

NIKwoaC

中國製造

89stang1

Stroked and Juiced

hoopty5.0

mechanicus terribilis

Similar threads

Privacy & Transparency

Privacy & Transparency