• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

What Gear Ratio With A Power Adder?

  • Thread starter Thread starter Kris6541
  • Start date Start date Sep 17, 2005
K

Kris6541

New Member
May 16, 2005
13
0
0
Sep 17, 2005
#1
  • Sep 17, 2005
  • #1
It would seem everbody agrees that 4.10's are the way to go on a naturally aspirated 05. My question is: are they still the best choice with a supercharger? I am installing the Saleen blower on my ride when I return from Iraq in a few months. Would the 4.10's be too much or should I stick with the stock 3.55's?
 

Infinity

Founding Member
Apr 7, 2002
956
0
0
Charlestown, IN
Sep 17, 2005
#2
  • Sep 17, 2005
  • #2
I'd say stick with the 3.55's. If it isn't enough, then change them. With a positive displacement blower going in, you may have traction issues with more gear.
 

cleveland

Founding Member
Feb 19, 2002
579
0
0
SF>...
Sep 18, 2005
#3
  • Sep 18, 2005
  • #3
we have traction issues bone stock but with more power that issue grows worse with poor driving. Most power adders could use the help from sticky tires and some suspension mods.

-Dan
 
S

subzero05

New Member
Dec 21, 2004
190
0
0
Sep 18, 2005
#4
  • Sep 18, 2005
  • #4
I had installed 4:10's in the car prior to installing the blower= no traction!..What a ride, but it was just too much IMO..I went back to the 3:55's and it is much better.I may however switch to the 3:73's as I feel this would optimize the entire package perfectly
 
D

discofan

Member
Apr 21, 2005
108
0
16
Sep 18, 2005
#5
  • Sep 18, 2005
  • #5
Kris6541 said:
It would seem everbody agrees that 4.10's are the way to go on a naturally aspirated 05. My question is: are they still the best choice with a supercharger? I am installing the Saleen blower on my ride when I return from Iraq in a few months. Would the 4.10's be too much or should I stick with the stock 3.55's?
Click to expand...


Dear Kris,

I've talked to alot of SVT Dealers and others who have supercharged, and they say that a 3.73 is as much gear as you would need with this type of power adder...

No adder = go to the 4.10

Got 3.55 = stay with them because the cost of a 3.73 install would not change performance enough to justify the $$$..

If traction is a problem, go to a widen tire...

Dave
 
P

PhillyMak

New Member
Sep 15, 2005
5
0
0
Sep 19, 2005
#6
  • Sep 19, 2005
  • #6
our procharged 05s have 4.10 gears and on mt et radials we hook up fina at the track through the stock 5 spd. and the stock auto tranny. we have some suspension mods but nothing too crazy... as said before its all in how you drive it.

check out our website to see the cars. the gallery has some pics at the track... the red one is 5 spd and the grey one is auto.
 
P

PhillyMak

New Member
Sep 15, 2005
5
0
0
Sep 19, 2005
#7
  • Sep 19, 2005
  • #7
p.s. dave, width of the tire is not a very important factor when choosing the right tire for your setup... tire compound is about 90% of choosing the proper tire for your application, then you can consider things like size, profile, and psi that you want to run. as far as getting a big footprint goes, thats overrated.
 
D

discofan

Member
Apr 21, 2005
108
0
16
Sep 19, 2005
#8
  • Sep 19, 2005
  • #8
PhillyMak said:
p.s. dave, width of the tire is not a very important factor when choosing the right tire for your setup... tire compound is about 90% of choosing the proper tire for your application, then you can consider things like size, profile, and psi that you want to run. as far as getting a big footprint goes, thats overrated.
Click to expand...

Dear Phil,

Thanks for the expert information regarding the aspects of the tire issue...

I never thought there was so much to learn about rubber...

Thanks, Dave
 

cleveland

Founding Member
Feb 19, 2002
579
0
0
SF>...
Sep 19, 2005
#9
  • Sep 19, 2005
  • #9
Tire height is also a matter to look at with care, picking the incorrect gear can hurt your hole shot. Taller tires need those numerically higher gears to move em.

-Dan
 

2L8IWON

Founding Member
Apr 5, 2002
143
1
18
Va Bch, VA
Sep 19, 2005
#10
  • Sep 19, 2005
  • #10
I'd do 4.10s, I have them on my Mystic and loved it and had them on the 03. Traction will be a problem regardless... one just needs some sticky tires to combat that. If you are worried about traction that bad I'd throw 3.73s on. The ONLY way that I'd leave a stock gear in the car is if I was going with a Turbo setup.
 
You must log in or register to reply here.

Similar threads

3.08 gears with a manual trans
  • limp
  • Aug 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
43
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 14, 2026
Qtrhrse23
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
363
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 28, 2026
from6to8
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
386
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?