What has to be installed with the Street Heat package?

KlrSnk · Apr 3, 2007

My friend is ordering the Street Heat from Trickflow and he asked me if any other parts had to be installed. I couldn't tell him exactly since I done mine all at once. So I figured I would ask good ol' stangnet.

WilwoodFiveO · Apr 3, 2007

He will need a 70/75mm TB, A 70-77mm MAF, a matching EGR plate, New injectors, new fuel pump (would help) and he doesn't need these but will help is a new ignition system and new exhaust. probly more but thats the major stuff.

KlrSnk · Apr 3, 2007

Thanks!

Anybody else know if there are anymore?

Cwalk · Apr 4, 2007

some 3.73's or 4.10's would help out alot too.......

Aliate X · Apr 5, 2007

I bolted this kit onto a bone stock motor. You dont NEED any of that. The kit works fine on a stock motor utilizing stock TB, MAF, injectors etc. My car is currently going 13.0's@106 (im going 12's next week I gaurentee it) with just this kit on a stock motor. All you NEED is lifters. A waterpump is a nice addition, just a stock one.

Cwalk · Apr 5, 2007

Aliate X said:
I bolted this kit onto a bone stock motor. You dont NEED any of that. The kit works fine on a stock motor utilizing stock TB, MAF, injectors etc. My car is currently going 13.0's@106 (im going 12's next week I gaurentee it) with just this kit on a stock motor. All you NEED is lifters. A waterpump is a nice addition, just a stock one.

he's right just look at his sig.......................those gears helped alot I bet.

Sicarius428 · Apr 5, 2007

Ya. Get some FMS lifters and save yourself the headache. An edelbrock or stewarts waterpump would be nice but that isn't hard to change later. Maybe an adjustable fuel pressure regulator because I remember it was a pain to replace later on. Stock TB, mass air, Fuel pump and injectors will work for now. Might not be bad to upgrade later but nothing immediate.
Kevin

KlrSnk · Apr 5, 2007

Thanks guys, I just told my buddy this and he is very excited. He thought it was going to cost atleast 1k more for the other mods.

:SNSign:

WilwoodFiveO · Apr 5, 2007

Sicarius428 said:
Ya. Get some FMS lifters and save yourself the headache. An edelbrock or stewarts waterpump would be nice but that isn't hard to change later. Maybe an adjustable fuel pressure regulator because I remember it was a pain to replace later on. Stock TB, mass air, Fuel pump and injectors will work for now. Might not be bad to upgrade later but nothing immediate.
Kevin

Hey which lifters did you use from them i looked it up and i saw four different ones? im ordering this kit soon and would like to have all the parts in mind when i order.

Thanks

ShortThrow50 · Apr 5, 2007

just regular fms roller lifters. What do you mean 4 different ones? Roller camshaft = roller lifters

Aliate X · Apr 5, 2007

Cwalk said:
he's right just look at his sig.......................those gears helped alot I bet.

i was referring to wilwoods post.

WilwoodFiveO · Apr 6, 2007

sorry i ment to ask weither i need a lift bar? i don't really understand lifters and motors yet.

Mr. Rustypwnz · Apr 6, 2007

nope just swap the lifters in, all you need are the lifters, no hardware.

What has to be installed with the Street Heat package?

KlrSnk

New Member

WilwoodFiveO

Member

KlrSnk

New Member

Cwalk

New Member

Aliate X

Member

Cwalk

New Member

Sicarius428

Active Member

KlrSnk

New Member

WilwoodFiveO

Member

ShortThrow50

Member

Aliate X

Member

WilwoodFiveO

Member

Mr. Rustypwnz

Advanced Member

Similar threads

What has to be installed with the Street Heat package?

New Member

Member

New Member

New Member

Member

New Member

Active Member

New Member

Member

Member

Member

Member

Advanced Member

Similar threads

Privacy & Transparency

Privacy & Transparency