what heads do i have?

[6SpeedLX]

i tried searching for pictures or information with no luck..on the front of the heads there are 2 bars and a 3rd bar about an inch away...at first i thought they were GT-40 heads but now that ive seen a picture of GT-40 heads with the 3 bars evenly spaced next to each other, im a bit skeptical. from what i described, would you guys say those are just the average e7's?

 

[bill302]

how about posting some pictures of your heads.

 

[TomCat]

Yeah get a pic up... AFIK E7s don't have bars like you're describing.

 

[6SpeedLX]

ok yea i had a feeling the picture request was coming, ill try and snap a shot tommorow afternoon...im really curious as to what heads i have

 

[6SpeedLX]

ok so its not 3 bars its 2

ok i moved a few wires out of the way and noticed it was only 2 bars instead of 3....i dont know if that helps or anything. i also snapped the best picture i could with the crappy camera i have...i hope this helps...if not ill just have to wait till i tear the engine down for some mods

 

[2002BLGT]

ok i moved a few wires out of the way and noticed it was only 2 bars instead of 3....i dont know if that helps or anything. i also snapped the best picture i could with the crappy camera i have...i hope this helps...if not ill just have to wait till i tear the engine down for some mods

look by the head bolt holes does it say GT or gtp near the corner lower head bolt hole , flip them over and look on the underside of the pushrod holes and post the casting number .....pic is kinda blurry