what heads do i have?

6SpeedLX

New Member

Apr 5, 2005

100

0

0

Mass

Feb 14, 2006

#1

• Feb 14, 2006

• #1

i tried searching for pictures or information with no luck..on the front of the heads there are 2 bars and a 3rd bar about an inch away...at first i thought they were GT-40 heads but now that ive seen a picture of GT-40 heads with the 3 bars evenly spaced next to each other, im a bit skeptical. from what i described, would you guys say those are just the average e7's?

 

bill302

Active Member

Nov 2, 2005

2,131

1

46

alabama,gadsden

Feb 14, 2006

#2

• Feb 14, 2006

• #2

how about posting some pictures of your heads.

 

TomCat

New Member

Apr 19, 2005

412

0

0

Utah

Feb 14, 2006

#3

• Feb 14, 2006

• #3

Yeah get a pic up... AFIK E7s don't have bars like you're describing.

 

6SpeedLX

New Member

Apr 5, 2005

100

0

0

Mass

Feb 14, 2006

#4

• Feb 14, 2006

• #4

ok yea i had a feeling the picture request was coming, ill try and snap a shot tommorow afternoon...im really curious as to what heads i have

 

6SpeedLX

New Member

Apr 5, 2005

100

0

0

Mass

Feb 16, 2006

#5

• Feb 16, 2006

• #5

ok so its not 3 bars its 2

ok i moved a few wires out of the way and noticed it was only 2 bars instead of 3....i dont know if that helps or anything. i also snapped the best picture i could with the crappy camera i have...i hope this helps...if not ill just have to wait till i tear the engine down for some mods

 

Attachments

• S1010021.webp

  9.8 KB · Views: 102

2

2002BLGT

Well-Known Member

Dec 18, 2003

2,945

4

59

Bedford VA

Feb 16, 2006

#6

• Feb 16, 2006

• #6

6SpeedLX said:

ok i moved a few wires out of the way and noticed it was only 2 bars instead of 3....i dont know if that helps or anything. i also snapped the best picture i could with the crappy camera i have...i hope this helps...if not ill just have to wait till i tear the engine down for some mods

Click to expand...

look by the head bolt holes does it say GT or gtp near the corner lower head bolt hole , flip them over and look on the underside of the pushrod holes and post the casting number .....pic is kinda blurry