final5-0 said:Adam
Please don't go over to the Dark Side
Mod Motor
Grady
AznStanger3v said:now now Grady, dont hate. I met a guy that had a fox with an 01 cobra motor in that, definently the best of both worlds (well almost, if it was an SN95)
Mach1man22 said:My Goals are minimal for my car. Just give me a Carbon Fiber driveshaft
here's the car for you to start with then:Black95GTS said:Sell it, buy a 4V Cobra, and drop a Kenne Bell, injectors, chip, and MAF in it.
Seriously.
Adam
BlackVert said:here's the car for you to start with then:
http://cgi.ebay.com/ebaymotors/ws/e...K:MEWA:PIC&viewitem=&item=320040715839&rd=1,1
i almost bought it, but the wife said she wanted me to fix mine instead, hence my goals
Danman765432 said:Mine is to do an h/c/i in the spring (edelbrock performers, Cobra Intake, Crane 2031) and boost up my nitrous to a 125 shot...hoping for 400rwhp
Pokageek said:What those kits dont tell you is that the 125HP shot is not 125HP. It is more like 70-80FWHP (stick) depending on how you calculate FWHP which for stick and depending on the total HP "number" is typically calulated anywhere from XXXrwhp / .83 - .85 and for auto approx. XXXrwhp/ .80 .
Why? The reason is that you have to retard the timing to prevent detonation. Retarding the timing takes your HP level lower than you would be starting from N/A with maximized timing. For me, cats also took about 10-12 HP off the table. 400RWHP will not be achievable with your specs in my o. With a killer cam and less driveability maybe closer to 350-360rwhp best in my o unless you go bigger engine. The auto is going to hold it back also. These are just some ideas to consider.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?