• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What is the stock T5 capable of?

  • Thread starter Thread starter nightrider50
  • Start date Start date Jun 21, 2009
N

nightrider50

Member
Aug 28, 2003
186
0
17
California
Jun 21, 2009
#1
  • Jun 21, 2009
  • #1
How much power will the T5 transmission handle?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 21, 2009
#2
  • Jun 21, 2009
  • #2
If you never speed shifted it and never dumped the clutch or exposed the transmission to shock loads of any kind, maybe 400 HP. But if you have 400 HP, you WILL be doing all the stuff you aren't supposed to do...

Some of the guys will suggest T5 gear sets and rebuilt T5 transmissions with special gears and this and that. The question about them is will they continue to take abuse and street driving over the 130,000 - 170,000 miles that is the typical lifespan of a T5 in a HiPo Mustang.

My personal preference is a transmission from the Tremec 3550 family - 3550, TKO, Tremec TKO 500, or Tremec TKO 600. See TTC: TREMEC Transmissions for more information. The Tremec transmissions from this group will take whatever abuse that you can throw at them and never fail. All you have to do is keep the properly lubricated and they will work great and last a very long time.
 

rbonella

Member
Dec 15, 2008
409
6
19
@ home
Jun 21, 2009
#3
  • Jun 21, 2009
  • #3
the stock t5 can handle a good amount, the real question is how long will it last? Like Jrichker said, it depends on if this is mild street driving, rolling on the power, street tires that spin are easier on parts than drag radials or slicks that HOOK. Will a t-5 handle a 400 hp drag car, maybe a pass or two. Many, many variables in this equation
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,258
17,942
224
Massachusetts
Jun 21, 2009
#4
  • Jun 21, 2009
  • #4
I've seen guys blow it with a stock 5.0, and then i've seen others guys drive it behind a 350HP 5.0 for years with no prob. It's all inhow you drive.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jun 21, 2009
#5
  • Jun 21, 2009
  • #5
Its all in how you drive it. I've broken T5s on a stock 5.0 on street tires, and then I've heard of people running 10s on them. Like jrichter said, baby it, and it'll handle some power. Speed shifting and clutch drops on sticky tires will kill a T5 even on a bone stock car.

If you google "T5 torque ratings" you'll find year and application specific tables of torque ratings for these trannys. I believe the later-year Fox "World Class" T5s were rated for 300 ft-lbs of torque.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,258
17,942
224
Massachusetts
Jun 21, 2009
#6
  • Jun 21, 2009
  • #6
The 85.5-1989 World Class was rated at 275 ft-lbs


The 1990+ WC T-5 was rated at 300 ft-lbs.

That's stock 5.0 power right there
 
N

nightrider50

Member
Aug 28, 2003
186
0
17
California
Jun 22, 2009
#7
  • Jun 22, 2009
  • #7
Ok so my new setup should be pushing upwards of 450-500 at the wheels. But the T5 was replaced less than 20,000 miles ago. From what I've gathered, maybe I should run the T5 with the new setup and see how long it can hang in there. Sound like a decent plan?
 

BLOWN347STROKER

Member
Jan 13, 2009
237
0
16
topeka kansas
Jun 22, 2009
#8
  • Jun 22, 2009
  • #8
I have got my completely stock t-5 backing my 95 5.0 mustang. It has around 575hp I haven't finished dyno tuning it yet. It is holding up fine right now and lets just say I haven't babied it. So I think it just depends on the transmission.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Jun 22, 2009
#9
  • Jun 22, 2009
  • #9
Car #1. All stock 95K shifted perfect.

Car#2. HCI P600B Procharger 12-13psi, no HP numbers, but it's 1/4 mile MPH was always 113-114 and that was with a 3.08 gear set. I figure 370-400RWHP max and the stock T5 was fine. NEVER had an issue.

Car #3. All stock 145K...2nd and 3rd gear were wasted. Don't know why, I bought it like that...prolly owned by a dumb### that couldn't drive. I got it rebuilt and installed it in a car with 3.73's and bolt ons. Held up fine.

I think the T5 is an excellent transmission. Don't power shift it and drop gears at too high speeds etc...
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jun 22, 2009
#10
  • Jun 22, 2009
  • #10
nightrider50 said:
Ok so my new setup should be pushing upwards of 450-500 at the wheels. But the T5 was replaced less than 20,000 miles ago. From what I've gathered, maybe I should run the T5 with the new setup and see how long it can hang in there. Sound like a decent plan?
Click to expand...

Milk the T5 for the time being, but have a better trans on order, haha.

Seriously, though, if you're not hard up for the money, having a fresh TKO or something like that sitting in the garage until you are ready to swap it in or until you break the T5 wouldn't be a bad idea.
 
5

57fairlane

New Member
Apr 2, 2005
560
0
0
Oakwood, GA
Jun 22, 2009
#11
  • Jun 22, 2009
  • #11
There's the same post over there on corral . . .

it will break without a doubt regardless of how you drive it.

Its just a matter of when and where.
 
G

Glenn

Founding Member
Aug 20, 1999
939
0
17
Houston
Jun 28, 2009
#12
  • Jun 28, 2009
  • #12
Depends. 93 Stock T5, 400 hp beating the crap out of it for over 10 yrs with that hp. I have not been kind, but the stickiest tire that's been on it has been Nito drag radials. I've never had traction. That's why I've been lucky.
 
5

57fairlane

New Member
Apr 2, 2005
560
0
0
Oakwood, GA
Jun 29, 2009
#13
  • Jun 29, 2009
  • #13
Glenn said:
Depends. 93 Stock T5, 400 hp beating the crap out of it for over 10 yrs with that hp. I have not been kind, but the stickiest tire that's been on it has been Nito drag radials. I've never had traction. That's why I've been lucky.
Click to expand...

its the torque that kills it or rather flexes the case.

If you had a 4 cylinder turbo motor making 400hp and 300ft-lbs the t5 will last a heck of a lot longer than a 393 with gt40 heads making 400hp and 500ft-lbs.

I know of two in daily driven cars that just blew up 3rd just putting around town.

One lasted a year and a half of 300rwhp and 360rwtq and the other lasted 8 months of 420rwhp and 400rwtq.
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Jun 29, 2009
#14
  • Jun 29, 2009
  • #14
It is capable of a small nuclear explosion.
 

TenorPlayinGuy

Founding Member
Aug 3, 2001
1,208
0
36
Canyon Country, Ca
Jun 30, 2009
#15
  • Jun 30, 2009
  • #15
The three t-5s Ive had all ran decent with care and restraint. I ran on some cheapy cooper cobra s-rated tires on my second (turbocoupe T-5) blew that one all to hell, drove home 10 miles with only 2nd and 3rd. The T-5 I have now is from an 88, and it's been fine for 4 years now, I get way more grip now then I did then. More power as well. But I drive like a grandma compared to most of these guys on here.
 

blackened88lx

Active Member
Aug 9, 2006
0
4
28
Connecticut
Jun 30, 2009
#16
  • Jun 30, 2009
  • #16
Like a lot of people have mentioned it's all in how you drive it. If you powershift, it will break. I've seen them survive powershifting for quite a while but most go pretty quickly. I grenaded 3rd in mine with a stock motor and street tires. If you shift it like grandma, sure it will last longer, but wtf is the point of that.
 
You must log in or register to reply here.

Similar threads

Drivetrain 5th Gear Ratio
  • PonyGTrider
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
33
Views
1K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
Q
T5 identification
  • 3054tony
  • May 16, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
450
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 20, 2026
AeroCoupe
M
Drivetrain T5 Transmission Leak at Tailshaft
  • MDrisc
  • Jun 17, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
408
Fox 5.0 Mustang Tech Jun 18, 2025
AeroCoupe
Drivetrain How much resistance, if any at all, is normal on a new 1st gear and synchro on a WC T5 transmission?
  • sleep-e
  • Jan 21, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
259
Fox 5.0 Mustang Tech Jan 22, 2026
sleep-e
D
TKX Transmission Shifter
  • dropteeth
  • Aug 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
391
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 2, 2025
revhead347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?