What is Valve float

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
I have been hearing alot about valve float lately. It has got me thinking about my combo. I know what valve float is, I just don't know how to determine if I have it or not? Is it a sound? Is it the way it revs or lack of revving? I know it can be deadly to your valve to piston clearance because it actually keeps the valve open long which increases duration of the ramp. Please any info here would be appreciated.
 
Basically your springs can't keep up with your cam. Sounds and feels like you are hitting the rev limiter, but you aren't.
You don't list your cam with your combo. If it's stock it's unlikely that you have a problem.
 
It's a trickflow stage 1 and I have no idea what springs are on the stock heads. I guess it doesn't matter since I know I don't have valve float now. But, I will be going to ported gt40 irons off of my fathers 94 cobra. They only have 40,000 miles on them still, if their is a chance of valve float I will be upgrading the springs before the supercharger gos on.
 
With 1.7 rockers and a stage 1 cam, you should upgrade the springs before you put those gt40 heads on.

I'd also suggest that they be valve jobbed and bowls cleaned up. This way a machine shop sets the seat pressures on the springs.
Should cost around $200-$250 and is worth every dime, can get you up to around 15 rwhp. They will also check and make sure the rest of the heads parts are in good working order.
 
Already have that planned. I am just doing a gasket match, minor and I say minor intake and exh port enlargement, sort side work, bowl blend and then I will be sending it to get a valve job. I will be upgrading the spring like you suggested just to be on the safe side. To bad the valve job, cleaning and guide replacement is going to set me back $350.