What maf sensor should I have?

[stangbear427]

If you still have the A9L computer, than the Cobra MAF is ready to work with your 19#ers.

 

[vristang]

Yes, it's true. Rather than recalibrate the MAF for the 24s, SVT re-used the 19# sensor and made the conversion in the computer. Cobras don't use the A9L, they use the X3C, which amongst other things, allows the use of the 24# injectors with a 19# MAF.

There is a little confusion here so I just want to clear things up.

The X3Z (93 Cobra) computer used a 70mm MAF with a XX MAS (I can't remember the part number for the Cobra MAS right now, but it is different than the MAS used on the A9* cars).
You will not have good results running a 93 Cobra MAF/MAS on a A9L Mustang, regardless of what injectors are used.

However, the 94-95 Mustang used a 70mm MAF with a F2VF MAS. This MAF/MAS can be swapped directly with the stock MAF/MAS on an A9* Mustang, IF stock 19Lb injectors are used.
Or, one could run a 70mm MAF tube from a 93 Cobra, with a F2VF MAS from a 94-95 MAS.

The MAS on the 93 Cobra is not the same as the one used on the A9* Fox Mustangs.

I hope that made sense,
jason

 

[vristang]

Nice, im running a maf from a 3.8L ford taurus with no problems just FYI

Yes!
The 3.8 Taurus used the exact same part numbers as the stock Fox MAF/MAS

 

[vristang]

If you still have the A9L computer, than the Cobra MAF is ready to work with your 19#ers.

ONLY

IF

You use the F2VF MAS sensor.

Otherwise, the setup won't be very good.

 

[1Fine89stang]

So , does anyone want to buy my cobra MAF , from the looks of things its pretty useless to me.

 

[stangbear427]

How much

 

[vristang]

So , does anyone want to buy my cobra MAF , from the looks of things its pretty useless to me.

Just go to a j/y and pick up a F2VF sensor.

They were probably even used in other applications.


A 70mm MAF tube on an otherwise stock Fox Mustang can be worth 5-7hp.

 

[stangbear427]

The X3Z (93 Cobra) computer used a 70mm MAF with a XX MAS (I can't remember the part number for the Cobra MAS right now, but it is different than the MAS used on the A9* cars).

Part # on the MAS in the 55mm POS MAF in my Cobra is F1ZF.