What??? Mustang Hood Insulator

Rdub6 · Aug 5, 2021

ChillPhatCat said:
Mine was all chewed up by mice, I didn't even bother to look for a replacement... just ripped off what was left and tossed it in the trash. I rather like the look myself, it's also the best paint on the whole car.

Same here...... except I think it was quick work of some squirrels. Cause it was good one day and a few days later, along with some acorns deposited on the intake, and bad a few days later.
But anyway, I too like the look of the paint...... unless it’s an immaculate original!

Mustang5L5 · Aug 5, 2021

I took mine off years ago and left it off.

Only reason i put a new one on was because at the time it was $100 or so so i figured it would be a nice touch.

FortySix&2 · Aug 5, 2021

I took mine off for some reason or another that I don't remember. Probably 18 year old logic. I would like one now cause I like the little bit of sound dampening it provides. I feel like the hood sound better when you shut it.

Rdub6 · Aug 5, 2021

FortySix&2 said:
I took mine off for some reason or another that I don't remember. Probably 18 year old logic. I would like one now cause I like the little bit of sound dampening it provides. I feel like the hood sound better when you shut it.

A lot of 18yr old logic doesn’t compute in your 40’s and 50’s. Lol

91AOD5.0LX · Sep 4, 2021

At least the shipping is free lol

chrlsful · Sep 4, 2021

1K$, yup, not mine~

manicmechanic007 · Sep 4, 2021

Don't fret and just wait
If they are that expensive and are sought out enough someone will start making them
Just like Vintage Camaro and Mustang parts
You can find almost everything for the old ones now
79+ Fox bodies are just not old enough yet?

manicmechanic007 · Sep 4, 2021

You guys may not know but Ford had a fix them before you can sell them TSB and ONP (owner notification program) to fix the hoods from delaminating.
The painted top plastic hood piece would delaminate from the metal hood and they were flying off at freeway speeds
The fix was to remove the hood insulation and 2 part epoxy glue the hell out of them then reinstall the insulation
They gave us new clips and that new at the time expensive push pump epoxy gun stuff
We had to reuse the insulation and it would be all buggered up after the clips removal
I do not remember which years were affected 94-96 maybe
Same as 1996 Taurus we had to add felt line weatherstrips before they could even sell them. The windshields were buffeting right the hell out of there

FortySix&2 · Sep 4, 2021

The same seller has listed the hood insulation three times now. I don't know if they are sitting on a stock of them or have had non-payers the previous times.

chrlsful · Sep 5, 2021

manicmechanic007 said:
79+ Fox bodies are just not old enough yet?

fox = what I've been buyin for bout 15 yrs now. Gave up on the muscle & have been rehabin these ('78/88 +) since then. Good source of income, gettin in the 'classic car' status now. Soon I'll have to move up nother notch (each gen becomes unaffordable to me). Most said "poor business model. these new cropa kids aren't into cars." I have not found that to B true.

Mustang5L5 · Apr 6, 2022

Let’s see where this one goes

87-93 Mustang NOS hood pad fits 93 Cobra SSP GT LX | eBay

Yep, I'm that guy that bought one and saved it and now has nothing but foureyed cars. Correct for every 87-93 Mustang including the 93 Cobra. We do not, have not and will not ever part out a good car.

www.ebay.com

Rdub6 · Apr 6, 2022

Mustang5L5 said:
Let’s see where this one goes

87-93 Mustang NOS hood pad fits 93 Cobra SSP GT LX | eBay

Yep, I'm that guy that bought one and saved it and now has nothing but foureyed cars. Correct for every 87-93 Mustang including the 93 Cobra. We do not, have not and will not ever part out a good car.

www.ebay.com

Are they kidding with the shipping cost? Such a joke!

Mustang5L5 · Apr 6, 2022

Jesus...

for something that goes inside a fender and will never been seen. These concurs restorers have deep pockets

79-93 Mustang NOS inner fender sound deadener shield D9ZZ16072A pair set of 2 | eBay

We do not, have not and will not ever part out a good car. Long obsolete from Ford these have been in storage for 20 years. We have limited space and are very picky about the condition of the parts we keep.

www.ebay.com

Imatk · Apr 6, 2022

The problem is once you install it, the damn thing WILL have little tears in it after a little while. The radiator support brackets on mine wore through. I bought a new one probably 5 years ago and it still looks great aside from the couple little tears... but dropping 1k on another one and then it not being "perfect" if you actually drive the car is just crazy... to me

Mustang5L5 · Apr 6, 2022

Yeah, I don’t see someone who drives the car buying these as they will get dirty fast. But folks buying these are most likely the type that just did a full strip and repaint and are putting the car back together with OE parts. These are the same folks dropping $3k on a set of oem headlights.

I will admit, I installed mine 3 years ago and put maybe 50 miles on the car and it still looks brandy new. Of course, I also paid $140 for the thing from Ford

Mustang5L5 · Apr 7, 2022

Under Hood Sound Insulation Pad Heat Shield Liner for 1983-86 Mustang Gray/Black

Upgrade your 1983-1986 Ford Mustang with our Hood Insulation Pad Heat Shield for improved heat protection and classic car restoration. Shop now!

collectorsautosupply.com

@Noobz347

Not sure that will fit an areo. I could be wrong

Noobz347 · Apr 7, 2022

Mustang5L5 said:
Under Hood Sound Insulation Pad Heat Shield Liner for 1983-86 Mustang Gray/Black

Upgrade your 1983-1986 Ford Mustang with our Hood Insulation Pad Heat Shield for improved heat protection and classic car restoration. Shop now!

collectorsautosupply.com

@Noobz347

Not sure that will fit an areo. I could be wrong

Yeah, I dunno either. I just came across the thing. I don't know how well it will fit an 83-86 either (wonder why it doesn't include 79-82). hehe

Maybe somebody here will try it out and let us know.

91AOD5.0LX · Apr 7, 2022

This may be a stupid question but anyone know why some of the hood pads are gray and some black? Anything to do with years or the reproductions were gray and originals black, etc? Curious...

Noobz347 · Apr 7, 2022

91AOD5.0LX said:
This may be a stupid question but anyone know why some of the hood pads are gray and some black? Anything to do with years or the reproductions were gray and originals black, etc? Curious...

It denotes either a forged or hypereutectic hood liner.

Mustang5L5 · Apr 7, 2022

91AOD5.0LX said:
This may be a stupid question but anyone know why some of the hood pads are gray and some black? Anything to do with years or the reproductions were gray and originals black, etc? Curious...

I just think some fade to gray depending on conditions and such.

What??? Mustang Hood Insulator

So while I wait to figure out my rear end issues

That is…until I whipped out my Bissell

Active Member

So while I wait to figure out my rear end issues

I have a slight sag in my rear

Active Member

Active Member

Active Member

That is…until I whipped out my Bissell

So while I wait to figure out my rear end issues

That is…until I whipped out my Bissell

Active Member

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

Stangnet Facilities Maint Tech... Er... Janitor

I have a slight sag in my rear

Stangnet Facilities Maint Tech... Er... Janitor

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency