• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What other cars can I get a MAF from? Ford SHO? Thunderbird?

  • Thread starter Thread starter Black1987Stang
  • Start date Start date Dec 14, 2005

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Dec 14, 2005
#1
  • Dec 14, 2005
  • #1
What kind of car or truck can i get a maf from to work for my 19lb injectors? I heard I could take one from a Ford SHO and it would even be better than the stock maf Anyways what vehicle could i get a maf from for my stang. Im running 19lb injectors, Even just the top sensor part would be good, i have the housing. Thanks
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 14, 2005
#2
  • Dec 14, 2005
  • #2
94-95 Mustang GT MAF - $40-$100. It is 70 MM instead of the stock 55 MM on regular stangs built prior to 94. It uses a slip on duct on the side that goes to the throttle body and a 4 bolt flange on the other. You need a $25-$35 flange adapter from Pro-M to fit the stock slip on air ducting that goes to the air box. Wiring plugs right in with no changes. I got a metal flange adapter from Powered by Ford for $35 and tax. That was over a year ago. Summit Racing may also have one too.

Powered By Ford
1516 South Division Avenue
Orlando, FL 32805
Hours 0800-1800
Phone 407-843-3673
http://www.poweredbyford.com/
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Dec 14, 2005
#3
  • Dec 14, 2005
  • #3
Thanks alot, is there any other cars i could get a maf from that anyone knows of?
 
S

SaleenSHO

New Member
Mar 31, 2005
41
0
0
Findlay, OH
Dec 14, 2005
#4
  • Dec 14, 2005
  • #4
I dunno if the MAF is the same on the SHO. I wouldnt try that one. The SHOs either came with a 3.0L or a 3.2L v6, or a 3.4L v8, and they were all built by yamaha. Not sure if the maf for those will fit a stang.
 
A

Allforspeed

New Member
Oct 25, 2004
264
0
0
Dec 16, 2005
#5
  • Dec 16, 2005
  • #5
the one from a supercharged tbird is 70mm and does not require any special flange, got it for 10$ at pick and pull, heard they make the car run a little lean, but on a stock or bolt on car that would probably help it out, i run nitrous and lean=bad so i just use the stock one
 
You must log in or register to reply here.

Similar threads

K
Digital Tuning Going heads/cam/intake. Do I need a tune?
  • karhoot
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
613
Fox 5.0 Mustang Tech May 14, 2026
karhoot
K
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
274
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
T
First Car, what should I do for power??
  • tunedV6
  • Apr 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
282
1996 - 2004 SN95 Mustang -General/Talk- May 4, 2026
580HP*428Cj
5
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
597
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
884
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?