What size belt (a/c delete)

[Foxwolfe]

I know this was answered before but I cant seem to find the thread atm.

So anyway I just got my FRPP a/c elim kit in the mail yesterday and I am planning on installing it today, but I was wondering if anyone could tell me the belt Ill need to get from napa auto parts once Im done.

Thanks in advance.

 

[sn9550]

I believe it is an 84 1/2" belt with stock pulleys.

 

[capri332]

with stock pulleys and no smog pump get one for a 95 taurus 3.0 w/air non sho

 

[85_SS_302_Coupe]

With stock pullies, no smog and no A/C, you'll need a 740K6 or 745K6. The 740 is going to be tight and a little tough to get onto your pullies but works great once it's there and will stretch and be easier to get on and off after it breaks in. I've got a 747K6 and it's almost too long, so my tensioner is almost completely open, or straight up and down if that makes any sense.

If you can still drive the car, just take it to the shop and try a few untill you get it right.

 

[NEG1071]

I have FRPP ud crank, Cobra wp, and od alternator with FRPP A/C delete, and no smog..........so my belt is a Motorcraft 71.4.............

 

[Legendary]

I have FRPP ud crank, Cobra wp, and od alternator with FRPP A/C delete, and no smog..........so my belt is a Motorcraft 71.4.............

Nice avatar. I doubt it would be up for long though.