what size tires to get?

racer02gtstang · Nov 14, 2005

ok.. ive got some 17x10.5 inch rims on their way here. the bullet deep dish's for my stang... what size tires should i put on them? i want something that wont wear down so fast but also will grip traction.... here are my mods....

BBK LT headers
BBK catted X pipe
Borla Catback
FFRP 3.73 gears
Blu thunder short throw shifter
75mm accufab TB and C&L upper plenum
90mm lightning maf
42lb ford injectors
superchips flip chip
Aftercooled Vortech @ 10psi
homemade boost pipe
spec stage 2 clutch
aluminum upper and lower rear control arms
eibach pro springs
full sub frame connectors
relocated battery to trunk

mustanginky · Nov 14, 2005

are you wanting drag radials?? i have heard good things about the bfg dr's.

racer02gtstang · Nov 14, 2005

i was looking at drag radials but im not to sure if they will wear to easily... i need something that will last me atleast 5 months. these tires i have on now have gone like 7 months so far and only have another thousand or two left of on them.

these will be street tires and the car is pretty much a daily driver... right now i dont get traction till 4th gear.

Hornetsnest · Nov 15, 2005

Depends on your budget and size you want...I'm not an expert, but this is what I've pretty much came up with in my exact same search...Go to tire rack for more info.

315/35-17:
(Best Bet)
BFG DRs
Goodyear GS-D3s
(Cheaper alternative)
Sumitomo HTRs

285/40-17:
(Best bet)
BFG DRs
Goodyear GS-D3s
(Cheaper alternative)
Kumho MXs

Edit: Forgot about Nitto 555s

trailblazr81 · Nov 15, 2005

From chatting with people on the forums Ive heard that 315's may rub. Depends on the car and the exhaust. Probably just a little work with a hammer and grinder or some cutter will fix that. Dunno if yer up for that. Or you may be one of the many that dont have issues. I also should be getting some 17x10.5's soon. I am looking at 275 or 285 40's since I know those will fit. I know many people also run 275/40's up front, but Ive heard those can rub. Since I want to do a little auto-x and club track events I'll probly stick with 245's in front. I have had success with BFG's and Yokohama tires. The Nitto's are good but a drag radial wont last as long with its reduced tread depth, and not sure how well it will do now that winter is coming.

skidad62 · Nov 15, 2005

trailblazr81 said:
From chatting with people on the forums Ive heard that 315's may rub. Depends on the car and the exhaust. Probably just a little work with a hammer and grinder or some cutter will fix that. Dunno if yer up for that. Or you may be one of the many that dont have issues...

On my 03 Centennial Vert have 10.5 deep dish bullitts with Goodyear F1 GS-D3 315/35/17s and there is NO rubbing. No problems with clearance with either the stock catbacks or with Steeda catbacks (made by Borla). No rubbing with fenders at all. Grip both wet and dry is FANTASTIC!!! Here's a few pics.
Before (245/45/17 Gatorbacks)...

After (F1 GS-D3 315/35/17)

A$$ shot...

Side view...

racer02gtstang · Nov 16, 2005

i wonder if i would rub any since my car has a drop on it? ive got the eibach pro springs... should i still be good with that? do the tires roll over any on the rims?

hognutz · Nov 17, 2005

skidad62 said:
On my 03 Centennial Vert have 10.5 deep dish bullitts with Goodyear F1 GS-D3 315/35/17s and there is NO rubbing. No problems with clearance with either the stock catbacks or with Steeda catbacks (made by Borla). No rubbing with fenders at all. Grip both wet and dry is FANTASTIC!!! Here's a few pics.
QUOTE]

no he is correct but it is catback/wheel offset issue IMO. deadlurker had an issue with his bassani catback and 10.5 with 315's. There are many people running this setup with no problems so as long as the rim offset/ tailpipes are right they won't rub.

hognutz · Nov 17, 2005

racer02gtstang said:
i wonder if i would rub any since my car has a drop on it? ive got the eibach pro springs... should i still be good with that? do the tires roll over any on the rims?

drop is not really going to matter. it is the passenger side tailpipe that is the issue. where it is at the tire is going to be by it no matter what your ride height.

trailblazr81 · Nov 17, 2005

skidad62 said:
On my 03 Centennial Vert have 10.5 deep dish bullitts with Goodyear F1 GS-D3 315/35/17s and there is NO rubbing. No problems with clearance with either the stock catbacks or with Steeda catbacks (made by Borla). No rubbing with fenders at all. Grip both wet and dry is FANTASTIC!!!

Which is why I said MAY RUB!! Yours doesnt. Many other dont. Some do. Depends on the car and the exhaust...

what size tires to get?

racer02gtstang

New Member

mustanginky

New Member

racer02gtstang

New Member

Hornetsnest

New Member

trailblazr81

Member

skidad62

New Member

racer02gtstang

New Member

hognutz

New Member

hognutz

New Member

trailblazr81

Member

Similar threads

what size tires to get?

New Member

New Member

New Member

New Member

Member

New Member

New Member

New Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency