What subframe connectors to use with the borla side exit kit?

95Vert · Nov 6, 2006

I searched but found nothing helpful. There's a kid who's willing to trade me his 1 SVO side skirt(lost the other one) and borla catback with tips for my 2 stock skirts and catback. I say it's a good deal, I already have a set of the SVO's at home, so I would have an extra one. Problem is, that I ordered full length subs for my car last week, but not side exhaust specific. Can someone guide me in the right direction as to who makes them and not too expensive?

Thanks

87_GT · Nov 6, 2006

i would love to know the answer to this question as i also have the borla side exit kit and i want subframes bad.

95riosnake · Nov 6, 2006

LoudToy958 (where has he been the last few months anyway?) was going to put the SpinTech subframe connectors on his cobra a while ago but ended up not going with the side exhaust. I am not 100% certain they will clear the tubes on the borla exhaust, as I don't know how it compares to the SpinTech side exit system. I will say their SFC's are REALLY beefy lookin, and IIRC Loudtoy958 told me they were in the $160-170 range which isn't terribly expensive. Hope this helps.

LoudToy958 · Nov 7, 2006

95riosnake said:
LoudToy958 (where has he been the last few months anyway?) was going to put the SpinTech subframe connectors on his cobra a while ago but ended up not going with the side exhaust. I am not 100% certain they will clear the tubes on the borla exhaust, as I don't know how it compares to the SpinTech side exit system. I will say their SFC's are REALLY beefy lookin, and IIRC Loudtoy958 told me they were in the $160-170 range which isn't terribly expensive. Hope this helps.

I was actually out to sea for a few months. I just got back here this weekend. Anyhow, from all the research I did, the spintechs seem like they would work. I never followed through with the project because I couldn't find a NIB Borla kit, and I found someone to make my tailpipes fit with the panhard and torque arm combo. If you e-mail spintech, they will send you some great pics of there SFCs, and you will see how the follow the contour of the floor panel. With some minor tweeking, I think they would work just great with any side exit kit. Dr. Gas sells some frame clearance tubes that I was gonna use as a last resort. www.drgas.com/store/product.php?productid=3&cat=1&page=1

95Vert · Nov 7, 2006

Thanks guys, I'll see if I can find spintech's e-mail and give shoote em one. I found these but they're a bit pricey, not sure if anyone else has used them or how they're welded on.

http://www.evolutionmsport.com/evmCart/index.php?main_page=product_info&cPath=2&products_id=5

95Vert · Nov 7, 2006

I just spoke to Spintech and they do make them. They follow the contour of the body which is why they fit over the side exhaust. They're priced at 169.99 and are in stock.

95Vert · Nov 7, 2006

Shane, I took a look at your website and your car is SICK!! Very nice job. That's the paint I'll be getting on mine.

LoudToy958 · Nov 7, 2006

95Vert said:
Shane, I took a look at your website and your car is SICK!! Very nice job. That's the paint I'll be getting on mine.

Thanks - just know that it is a lot to maintain Rio. ALMOST as hard as black, but its worth it. Not quite, but close. Its my favorite Color so its worth it.

Let us know how your side exhaust plans work out. I am interested to know if it works.

As for the EVM piece, it looks pretty stout. It came to mind to look into PHPs connectors too. They are a bit shorter, I doubt they would work, but they are worth looking into. Good luck.......

What subframe connectors to use with the borla side exit kit?

95Vert

New Member

87_GT

Member

95riosnake

Member

LoudToy958

Member

95Vert

New Member

95Vert

New Member

95Vert

New Member

LoudToy958

Member

Similar threads

What subframe connectors to use with the borla side exit kit?

New Member

Member

Member

Member

New Member

New Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency