WHAT TO DO ...

[) y2kGT (]

I am going to be putting some eibach sportlines on my car tomorrow and ordering my 295/35/18 tires tomorrow afternoon. Is there anything else i need/have to do other than installing the spring and mounting and balancing the tires? For example...LCA's ? CC Plates? Im a n00b to this all help is appreciated..

 

[1low03gt]

I have the Eibach sportline springs aswell,you will deffinetly need C&C plates!
I got Maximum Motorsports 4 bolt C&C plates,and they work well.And i also installed their poly urethane front spring iscolater pads.
Then eventually you should invest in struts.The factory ones aren't that bad,but might not last that long.
The list could go on,off set rack bushings,bumpsteer kit,ects,...

 

[White Stang]

After you get the springs and tires installed post some pics I would like to see your pony's stance. I have the C-Springs uncut with 18-10.5 with 295 35 18 tires here is a pic of my cars stance.

 

[) y2kGT (]

Which tires will last me longer? Kumho Ecsta MX or Nitto NT 555...

the sizes im buying are 265-35-18 front; 285 or 295/35/18 rear.

One more question what do i need for suspension when i install my eibach sportline springs? Caster camber plates, struts, etc. or will i be fine just adding springs?

 

[1low03gt]

You will need the C&C plates to get proper alignment!The rest can come after if you can't afford it all at once!!

 

[XStanger]

I have the sportlines and I don't have CC plates. I however left all of my spring isolators in, so I am not incredibly low. No uneven tire wear/alignment issues. 8000 miles so far.