• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

what would YOU do?

  • Thread starter Thread starter tony laq
  • Start date Start date Jun 22, 2005
Prev
  • 1
  • 2
First Prev 2 of 2
T

tony laq

New Member
Apr 19, 2005
121
0
0
Jun 23, 2005
#21
  • Jun 23, 2005
  • #21
thanks alot for the opinion guys! i wasnt aware that a mid pipe would cost me something down low, which sucks. i really dont race and its rare that the car goes over 4100 rpm or so. so top end really isnt a concern for me.

im not going O/R because of local laws..i just dont feel like dealing with emissions and cops.

i was under the impression that a mid pipe with stock everything else would just pretty much drop the tone a bit in addition to making it a bit louder. the only mods ive done so far is a FIPK II and an MGW. so as you can see i just gettin' started. its a 2002 gt stick.

-tony
 

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Jun 23, 2005
#22
  • Jun 23, 2005
  • #22
tony laq said:
thanks alot for the opinion guys! i wasnt aware that a mid pipe would cost me something down low, which sucks. i really dont race and its rare that the car goes over 4100 rpm or so. so top end really isnt a concern for me.

im not going O/R because of local laws..i just dont feel like dealing with emissions and cops.

i was under the impression that a mid pipe with stock everything else would just pretty much drop the tone a bit in addition to making it a bit louder. the only mods ive done so far is a FIPK II and an MGW. so as you can see i just gettin' started. its a 2002 gt stick.

-tony
Click to expand...


If you aren't ditching the stocker mid pipe, get Flowmaster 10s (the racers) and you will be pleased.
 

Fast02

New Member
Sep 29, 2004
239
0
0
Jun 23, 2005
#23
  • Jun 23, 2005
  • #23
with a catback or H pipe you may pick up 1-4 top end hp but will lose torque.
If your looking to make your car quicker Id vote for 4:10 gears or the Steeda U/D pullies. A programmer should be the last mod you purchase so Ive been told.

If you are going for looks in the engine area then maybe the c&l with a bbk CAI would look good and gain you about 4-7rwhp.
 
T

tony laq

New Member
Apr 19, 2005
121
0
0
Jun 23, 2005
#24
  • Jun 23, 2005
  • #24
just checked the flowmaster site and didnt see 10's. am i missing something? damn a loss of ANY hp/ torque isnt what i want right now...maybe the pullies are a better idea..if so i can afford somthing else too..they are'nt as much as the other stuff
 

mrvax

Stay thirsty my friends
Founding Member
Nov 29, 1999
5,225
3
79
SN Moderator: Orlando, Fl.
Jun 23, 2005
#25
  • Jun 23, 2005
  • #25
I would recommend gears as the #1 choice.
 

hotrodnut

Member
Jul 12, 2004
672
0
17
North Florida
Jun 23, 2005
#26
  • Jun 23, 2005
  • #26
tony laq said:
just checked the flowmaster site and didnt see 10's. am i missing something? damn a loss of ANY hp/ torque isnt what i want right now...maybe the pullies are a better idea..if so i can afford somthing else too..they are as much as the other stuff
Click to expand...
It seems beyond popular belief that a flash tuner would not be a first choice, including me, but if you want to get the low-end back that you lose from a free flowing larger diameter exhaust, the turner will do it. I went with exhaust first, then the tuner and then a gear change. I didn't feel a lot of difference with the exhaust down low or up top but I felt the tuner's effects on the bottom end and mid-range the most right away.

Also the tuner smoothed out the way my Mustang would rev up during normal driving and WOT. It even gave me a little increase in gas mileage, I fill up my car and check this everytime with a spreadsheet I made for keeping up with it.

It was nice to already have the Predator when it came time for my gear changes too, it made that a simple plug and play fix of the speedo.

Some more benifits I used from the Predator for is the ability to change my rev limiter, which I lowered from 7200 to 7000 for an extra measure of safety incase I missed a shift or got too happy with the throttle taking off and free spinning the tires to the rev limiter. I also was able to turn off my traction control which sometimes I forgot to do manually and was able to turn off the speed limiter which I really didn't need too but hey, it was there so I did. I was able to adjust my idle down 50 or so rpms because I felt 800 rpms was too much.

I haven't messed with the timing advance or richening up the fuel mix yet using the tuner but I hear a lot of talk about it's advantages and performance improvements.

Good luck in your choice(s) of your what to do's, I know it's tough with all there is to do to the Mustangs and the aftermarket stuff available. It looks as though you are getting some very good advice from these guys replying to your post too.

EDIT: oh yeah, one other thing, I was able to change my fan on and off settings to improve my cooling and keep the temperatures at a more constant state than the factory settings using the flash tuner.
 

edbo

New Member
Mar 31, 2005
198
0
0
Valley, AL
Jun 23, 2005
#27
  • Jun 23, 2005
  • #27
Flow 10's are really LOUD! If that's what you want, get an H pipe for them! Personally, gears are always the best first mod in my book (and nearly everyone else's too!).
 

9646gt

Member
Apr 7, 2005
595
3
18
Holloman AFB,NM
Jun 23, 2005
#28
  • Jun 23, 2005
  • #28
+1 for a mid pipe...if you dont have emissions where you live go the cheap route and pick up a o/r upr x pipe and have some mufflers (insert brand of choice here) and have them welded in if you can't afford the whole catback..will yield decent gains and help give your stang some sound..
 
J

jamez1502

Banned
Nov 6, 2003
135
0
0
Lakeland Fl
Jun 23, 2005
#29
  • Jun 23, 2005
  • #29
Gear is the biggest noticable gains next to boost.
 
T

tony laq

New Member
Apr 19, 2005
121
0
0
Jun 24, 2005
#30
  • Jun 24, 2005
  • #30
thanks alot for the info guys..ive never had a car i wanted/ could mod so this is all really new- also tough to know what to do when a local shop tells you a plen/tb will give you " about 30rhp" ..i wouldnt have know that was wrong if it wasnt for this site so thanks again.

as for gears, im a COMPLETE wuss..for some reason im just dead set against them ( for now at least). i really dont race and i like the way the car drives stock..for some reason i have a feeling that even 3.73's would some how screw up my car or the way it drives. anyway....

thanks again for the great info guys!

tony
 

BooWFO

New Member
May 10, 2005
991
0
0
Louisville, KY
Jun 24, 2005
#31
  • Jun 24, 2005
  • #31
Hotrodnut 7000RPM ?????????
Tony gears won't mess anything up I went 4.10's and love them (well actually kinda think I should have gone 4.30's but I want to FI in the future) if you cann't or won't do them have someone who does put them in. I didn't mention it because it wasn't one you listed. The plus if you do normal around town driving and normal flow of traffic driver your in the powerband more often. Lots more fun. Also if you haven't thought about it a set of subframe connectors are a great building block upgrade. The order I went was MGW, C&L inlet(gift), k&n, subframes, P&P stock upper, gears(4.10) dallas mustang to correct speedo. IAC blockoff cause I hated the hanging rpms.
 

hotrodnut

Member
Jul 12, 2004
672
0
17
North Florida
Jun 27, 2005
#32
  • Jun 27, 2005
  • #32
BooWFO said:
Hotrodnut 7000RPM ?????????
Click to expand...
Yep, Mach1, redline 6800rpms, factory rev limiter set at 7200, adjusted with predator to 7000rpms.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

J
Engine 4.6 Running rough at half throttle
  • jake411
  • Aug 3, 2026
  • SN95 4.6L Mustang Tech
Replies
5
Views
307
SN95 4.6L Mustang Tech Oct 20, 2026
DangStitches
D
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
18
Views
955
1996 - 2004 SN95 Mustang -General/Talk- Oct 19, 2026
squeak93
New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
441
The Welcome Wagon Oct 19, 2025
Clutchfork
S
what would you do? sell the project and buy completed or finish project?
  • STANG32
  • Feb 8, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
720
1965 - 1973 Classic Mustangs -General/Talk- Feb 16, 2025
rusty428cj
2004 mach1 sputter/missing issue
  • SMOKEDYA
  • Jul 8, 2023
  • SN95 4.6L Mustang Tech
Replies
8
Views
1K
SN95 4.6L Mustang Tech Jul 22, 2023
SMOKEDYA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?