With a holley systemax intake and stock fox valve covers. (It's a 94 GT btw) I went with the fox valve covers because they seal better than aftermarket ones and they're tall enough to clear my rockers where as the stock SN95 ones are not. The intake is an Ed Curtis ported Holley SysteMAX and a stock truck lower. The truck lower does not have a PCV port in the back of it like our original intakes do, and the fox valve covers do not have any breather ports. Any suggestions? All I can think to do is use the filler neck hole to stick the PCV valve in.... orrrr drill a port into the valve covers.
Casey
Casey