I know, I know, it's been covered a million times, and I've searched but I just want a straight up answer. I am building up a mostly stock motor for my 95' mustang that has a 88' engine in it. The one that's in there right now is worn out and starting to show leaks.
The new motor will probably have a trickflow upper and lower street intake, bigger throttle body, roller rockers, headers/flowmasters/h-pipe and whatever else I come upon. It will have stock heads for awhile until I can afford a nice set. In the future I plan to put some boost to it along with bigger injectors and other supporting mods. What I'm looking for is a good cam to put in the motor right now that will suit my needs. Any suggestions? And PLEASE post a link to it if possible. I don't want TOOOO rough of an idle but one that still gives me that nice rumble. Also what else will I need as far as valve springs/pushrods, etc. for this new cam? Thanks a lot!
Also, by the time this new motor is in, the car will have 3.73 gears if that matters at all about when the power will kick in.
The new motor will probably have a trickflow upper and lower street intake, bigger throttle body, roller rockers, headers/flowmasters/h-pipe and whatever else I come upon. It will have stock heads for awhile until I can afford a nice set. In the future I plan to put some boost to it along with bigger injectors and other supporting mods. What I'm looking for is a good cam to put in the motor right now that will suit my needs. Any suggestions? And PLEASE post a link to it if possible. I don't want TOOOO rough of an idle but one that still gives me that nice rumble. Also what else will I need as far as valve springs/pushrods, etc. for this new cam? Thanks a lot!
Also, by the time this new motor is in, the car will have 3.73 gears if that matters at all about when the power will kick in.