Which Head Bolts?

[NoSLOW5point0]

I am putting together a motor slowly but I have been collecting the pieces. My problem I have is what ARP part number head bolts do I need. I am Building off a 302 block but putting World Senior Heads on top. According to some people The heads are built for a 351 so I need head bolts that go from the 7/16 to 1/2. So many people are using different numbers. Any advice would be nice.

 

[5spd GT]

Check these out:

One of these two should work for ya

http://store.summitracing.com/partdetail.asp?part=ARP-154-3603 - 1/2" bolts...

or...

http://store.summitracing.com/partdetail.asp?part=ARP-154-3605 - 7/16" bolts with 1/2" washers...

 

[65ShelbyClone]

I got the Edelbrock stepped washers and ARP 7/16" bolts separately. Just standard smallblock ARP bolts and whatever Edelbrock's P/N is. Total for both was about $100.

 

[5spd GT]

Both the above link had the bolts/washers I thought...ranging from $50-$90...

I believe these are the edelbrock bushings you are talking about:

http://store.summitracing.com/partdetail.asp?part=EDL-9680&view=1&N=700+150+

Yeah, you can use these bolts (7/16"):

http://store.summitracing.com/partdetail.asp?part=ARP-154-3601&autoview=sku

with the above edelbrock washers that close in the 1/2" hole to a 7/16" hole...

So it would cost you around $90...as stated...