Which Offset/Backspacing with 96+ spindles?

onefstsnake

New Member
Nov 25, 2005
792
1
0
Northern VA
Well I got some 96 spindles, 2 piston PBR Aluminum calipers and rotors for $150.

I know the 96+ spindles are 8mm wider per side than the SN95 spindles.
8mm is about .31" or a little more than 1/4".

So does this mean I need 1/4" less backspacing? What about offset?


Please chime in.
I dont have the time/money to get this wrong... :(