Who built Your Engine?

[kj99]

MMR built my shortblock. It's got about 9000 miles on it so far and trouble free.

 

[TGJ]

Jim O'Neill @ Renegade Racing built mine in my TBird. 330+ RWHP N/A through a plastic PI intake, 4R70W auto and IRS is not to shabby.

 

[Orange...]

um...me.

When I get it bored and stroked it'll be.... me.

 

[jivepepper]

MMR built the short block. My son and I assembled it. I could not happier with the outcome.

 

[Kingcater]

I think MMR is the best place to go since they are the closest to me. Has anyone just bought a Forged shortblock and put their stock top end back on it....jw?

 

[ADRENLN]

vt is building mine....if they ever get done!

 

[V_Eight]

Pro Line is building my 324ci 2V.

 

[jivepepper]

I think MMR is the best place to go since they are the closest to me. Has anyone just bought a Forged shortblock and put their stock top end back on it....jw?

Thats whay I did and made 431 at 11.24 psi. I have since dropped a set hp 292 cams in with stock springs and no degreeing and picked 85hp.

Pro Line is building my 324ci 2V.

Ask them if they have a bigger Intercooler you can buy?

 

[V_Eight]

Ask them if they have a bigger Intercooler you can buy?

A 30x12x3 is the right size, but thanks for trying.

 

[jivepepper]

A 30x12x3 is the right size, but thanks for trying.

That does not look 30" long.

Mine is 30x12x3. You can see its taller and longer. Mine would cover the entire space in you bumper.

 

[CENTENNIALSTANG]

Pro Line is building my 324ci 2V.

Are you putting boost to it, i thought the 324 was a NA motor.

 

[V_Eight]

Are you putting boost to it, i thought the 324 was a NA motor.

It's not going to be 13.0:1 compression, so it can be boosted just fine. There's a vid on YouTube of a 2.6 KB and a 324 VT motor.

 

[V_Eight]

That does not look 30" long.

Mine is 30x12x3. You can see its taller and longer. Mine would cover the entire space in you bumper.

You put too much effort into that, and I commend you for it. It encouraged me to go out and measure, and no surprise to you that I was shipped a 25x12x3 by Mike Turbo.

(Doesn't make much difference when I decided to go to 2.6KB, but still!)

 

[jivepepper]

You put too much effort into that, and I commend you for it. It encouraged me to go out and measure, and no surprise to you that I was shipped a 25x12x3 by Mike Turbo.

(Doesn't make much difference when I decided to go to 2.6KB, but still!)

Oh it just took 2-3 mins lol. 2.6 Kb kicks. I'm just going upgrade to a t trim good enough.

 

[Uoroxxor]

I think MMR is the best place to go since they are the closest to me. Has anyone just bought a Forged shortblock and put their stock top end back on it....jw?

MMR built mine, shipped it to MS for me. And I put my heads and vt cams stage 2 back on it. And currently spraying the hell out of it. Well built and they were great to deal with.