Who has the SVO Side Exhaust?

LoudToy958 · Mar 22, 2006

I just found a brand new kit and ordered it up. I have SFCs, but I also have a guy that car bend pipe like nobodys business. I don't have full length SFCs, so maybe I will get lucky. I doubt it though. \

Anyhow, the question here is, does anyone have some underbody pics so I can see where the exhaust runs in relation to where the tips come out of the skirts.

I know someone is gonna ask $599.99 shipped for the Ford Racing Kit.

If it shows up soon and is the right kit, I will post its purchase location. I spent 30 minutes on the phone making sure it was the MJ kit, so it better be right.

Thanks in advance, Shane

95riosnake · Mar 22, 2006

Here's the best I can do...I looked through all the pics I had and this showed the routing the best. Hope it helps

LoudToy958 · Mar 22, 2006

Thanks. Ironically, I saved that pic from a thread way back. Unfortunatly it doesn't show what I need. I may just have to make something happen. I don't want to loose my sfcs. Dr Gas has some frame clearance tubes I may go with if I need too. I was hoping since I didn't have full length, I migh get away with it, but it doesn't look like it.

Thanks for the pic though. Did you ever find the tips you were lookin for. I think it was you who was lookin for tips.

95riosnake · Mar 22, 2006

About the tips, I don't really remember, that was probably when I wanted to do a custom side exit setup...those plans have since been scrapped. I am just gonna keep the borla for a while.

On a side note, if you have any clearance issues with the SFC's, I know SpinTech makes a set of SFC's that are made to clear side exhaust, might wanna check those out.

LoudToy958 · Mar 23, 2006

I am looking into the spintech SFCs now. I am hoping I can keep mine due to the fact they are great, and welded on. Looks like a lot of dremel and grinding time to get them off without a lot of damage.

I will let everyone know what I come up with when I finish everything.

Any more pics or info is great. Thanks again...

95riosnake · Mar 23, 2006

LoudToy958 said:
I am looking into the spintech SFCs now. I am hoping I can keep mine due to the fact they are great, and welded on. Looks like a lot of dremel and grinding time to get them off without a lot of damage.

I will let everyone know what I come up with when I finish everything.

Any more pics or info is great. Thanks again...

Yea if your SFC's work out with the pipes, let me know, cuz I have wanted to get some SFC's for a while, but didnt think any of them would fit except the SpinTech ones (and I would assume those are more expensive).

95Vert · Mar 23, 2006

Dan, what did you spray the underside of the car with? Looks cool and I'm pretty sure it avoids rust.

91LX_5L · Mar 23, 2006

ya im cerious what u sprayed with with too and if they have a black version. I was thinking of the stuff thats like rynoliner that you can spray underthere but its pretty messy stuff.

SVO sideskirts are so wicked!

LoudToy958 · Mar 23, 2006

95riosnake said:
Yea if your SFC's work out with the pipes, let me know, cuz I have wanted to get some SFC's for a while, but didnt think any of them would fit except the SpinTech ones (and I would assume those are more expensive).

I will tell you what. I e-mailed spintech for the info on the SFCs, and theirs seem to be monsters. They are very stout looking parts. I may get them just because they are so beefy. Not to mention, I have no doubt that their design will allow the side exhaust to work with minimal issues.

As for price, they are $169. Not too bad IMO.

95riosnake · Mar 23, 2006

95Vert said:
Dan, what did you spray the underside of the car with? Looks cool and I'm pretty sure it avoids rust.

91LX_5L said:
ya im cerious what u sprayed with with too and if they have a black version. I was thinking of the stuff thats like rynoliner that you can spray underthere but its pretty messy stuff.

SVO sideskirts are so wicked!

I had some rust going on, so I used a wire wheel on a grinder to remove all the rust (most miserable thing I've ever done under a car BTW), then prepped it and shot on an epoxy primer that my dad has (highly corrosion resistant). Then I topped it all off with paint I got from Advance auto (in spray cans), it was called Rust Tough enamel. I can't remember the brand that makes the paint, but it says "RUST TOUGH" really large on the can. Turned out great and a year later I don't have any rust showing up yet.

LoudToy958 said:
I will tell you what. I e-mailed spintech for the info on the SFCs, and theirs seem to be monsters. They are very stout looking parts. I may get them just because they are so beefy. Not to mention, I have no doubt that their design will allow the side exhaust to work with minimal issues.

As for price, they are $169. Not too bad IMO.

Damn, only $169? I think I know my next project for this coming summer! Do you have any pics of them? I just saw them in a parts list they sent me, but there werent any pictures.

95Vert · Mar 24, 2006

Damn Dan, that sounds like a lot of work. What did you have to remove? Sorry about the hijack. But I too love the SVOs, they look awesome.

slow50sally · Sep 28, 2006

Where do you get the SVO skirts from, I want some, I am pissed there was a guy selling some here in hawaii but I didn't like them but now I hate how my exhaust goes over my axles so going with the side

Therian · Sep 28, 2006

Dan the picture isn't showing up for me...did you move it? I went into the directory it's linked from and it doesn't exist there.

I'm interested in your rust proofing too...I have a bit, but it's mostly around the gas tank. did you drop yours? I fear I might have to because I have a bit of trust entering the trunk area

SVOs are sexy.

Who has the SVO Side Exhaust?

LoudToy958

Member

95riosnake

Member

LoudToy958

Member

95riosnake

Member

LoudToy958

Member

95riosnake

Member

95Vert

New Member

91LX_5L

LoudToy958

Member

95riosnake

Member

95Vert

New Member

slow50sally

New Member

Therian

The Highlander

Similar threads

Who has the SVO Side Exhaust?

Member

Member

Member

Member

Member

Member

New Member

Member

Member

New Member

New Member

The Highlander

Similar threads

Privacy & Transparency

Privacy & Transparency