Who is running in the 11's

Rootus

Officially Addicted
Feb 8, 2003
6,659
1
0
Portland, Oregon
And I mean in the quarter mile :D.

There is some info in the FAQ, but judging by the 1/4 mile time list, there's much that isn't listed. I want to see what combos (engine, suspension, weight reduction, whatever it takes) people have put together to go FAST. There are no turbo combos in the FAQ either, and I know there are a couple folks around here with hairdryers...

Dave
 
i'm at the upper end now but think my car has better times in it i wasn't hooking up the day i ran mine so i think mine should be good for 11.40's or so with a good 60 ft . we'll see soon !
 
I ran 11's with nitrous... I will be very upset if I can't make in the 11's now with my s-trim. Especially after i get it retuned in 2 weeks :nice: No more mass air meter pegging out on me at 5200 rpms... (BTW It pegged out on both the C&L and now the 80mm Pro-M) My new PMS should fix that though!!!

Of course my setup is similar to Eades... Except i can run 11.5 before i get kicked out because i run at an IHRA track instead of an NHRA... But I still plan on getting kicked out.. :lol:

Stock tranny, Stock shocks and suspension, Stock block... TIME BOMB is what my user name should be. :eek:
 
I ran in the 11's, but was booted before I could see what the car could actually do. Car went 11.9 @ 88mph on the brakes, and also went 123mph on another run launching soft and missing 2-3 shift.
My setup is pretty simple and streetable.
331, "Small" Edlebrock Heads (1.90), .498" Cam, Perf. RPM Intake, Shorty headers, and a S-Trim.
A Stroker/Blower combo with normal bolt-ons will net in the 500rwhp range easily
 
Ive gone 12.07 N/A but I had a nitrous grind cam profile in it at the time. Ive since then gotten Ed curtis to do me a N/A grind for my setup along with custom spec springs and titanium retainers. Im hoping to see 11.90s this time around with these changes. 331ci N/A 3,605lb car with driver. Specs are listed below. Sold my nitrous kit to buy a new tranny... never got to use it :(