In order to go with my current mods Im going to have to change my current cold air set up. Im running a Lightning 90MM Meter and I plan on getting one of the new Abaco DBX 97 Meters the only problem is this meter will not bolt up to my current Cold Air Set up. As you can see from the pics the Lightning meter has a 4 bolt flange and that is in turned bolted to the flange on the cold air that leads to my fender. The DBX meter just has the 4" inlet/outlet to accept an inlet pipe, it has no flange on it so it wont work this this set up. I checked the C&L site and the 94/95 inlet pipes are pretty cheap $109 on other sites. I just want to see how they look b/c I know with this pipe I wont have any issue bolting up the DBX meter and filter. Pics of my set up so you can see what Im talking about.