wideband..

I use the innovate LC1 with the XD16 gauge.....it should work with the tweecer...it works with the PMS if i connect a feed to it and load the proper file for it.

Yes it can. Blue wire to positive for logging, blue with a black tracer for logging ground. You, will however, need a data q or wire it into your egr sensor wire. I'd say to use a data q. Only $25 for serial or $50 for usb hookup. What software are you usikng with the tweecer? I use bineditor and the transfer was right for my plx. However, that appears to use a 0-4 v output, so you will prob have to config that in your software. Good Luck.

This is how I have mine hooked up to a dataq.