will 275's fit

On some cars the 275-50's will fit, on some they will hit the quad shocks, but if they do hit, you can flip the quads over and gain about 1/2 to 3/4 of an inch, I doubt they will hit the fender lip at all, but I personally would never put a 275-50 on a stock turbine wheel being only 7 inches wide, they bulge on an 8 so I would not do it unless you had some wider wheels.
 
Don't put that wide of a tire on a 7 inch wide rim... just my advice. Upgrade to at least an 8 or 9 inch. I run 275's on a 17x9 rim out back and had some small rubbing issues on my tailpipes, but after adding small 1/4" wheel spacers, haven't had any problems since. It would only touch when I'd go around corners and the chassis would flex. Adding subframe connectors and some suspension bracing always helps with that as well.