• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Will a t-5 last

  • Thread starter Thread starter 85ragtop
  • Start date Start date Jul 12, 2006
  • 1
  • 2
Next
1 of 2 Next Last

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jul 12, 2006
#1
  • Jul 12, 2006
  • #1
I have almost all of the 351 put togather. My AOD was in bad shape when I parked the car. I looked at getting a new one but the cost is not worth it. So I was wondering if I should get a reworked t-5 or some other 5 speed. I just want a trans that will last.
 

eagleautosports

New Member
Jul 7, 2006
139
0
0
Mebane NC
Jul 12, 2006
#2
  • Jul 12, 2006
  • #2
A T5 won't even hold up behind a stock 5.0 so forget it behind a 351. You should go with either a Tremec (heavy, no options) or a G Force (lightweight and no modifications needed to install). I know the T5 is cheap and the other two aren't but you'll have more headaches once third gear starts breaking again and again.
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jul 12, 2006
#3
  • Jul 12, 2006
  • #3
If I can find one in NC I would get it. I just don't want to ship some thing like a trans.
 

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Jul 12, 2006
#4
  • Jul 12, 2006
  • #4
It all depends on how much and how hard you drive your car. My T5 lasted me 6,000 miles after I supercharged my car..while my friend has gone through 3 of them in 8 months on his stock 5.0..
 

88Stang331

New Member
Mar 30, 2006
239
0
0
Jul 12, 2006
#5
  • Jul 12, 2006
  • #5
Tremec all the way, if your gonna do something do it right the first time and save yourself the trouble and hassle, because if you go with a T-5 you'll be going through them like skittles.
 

donsbad68

Immensely Educated
Jan 4, 2003
838
0
0
Oklahoma
Jul 12, 2006
#6
  • Jul 12, 2006
  • #6
I have a Astro Performance T5 in a 10 sec race car and has been there for 4 years and over 300 passes. I have the dog ring cut T5 they offer that they say is good to around 550-600 HP. www.astroperformance.com
 

donsbad68

Immensely Educated
Jan 4, 2003
838
0
0
Oklahoma
Jul 12, 2006
#7
  • Jul 12, 2006
  • #7
P.S. if you want to you can just order their kit and build it yourself
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jul 12, 2006
#8
  • Jul 12, 2006
  • #8
Yea, I had 3 AOD's in two years. The last time I had it redone to handle 350hp. It lasted six months. I will see if I can find one around here. Oh what is the difference in a 500 and the 600?
 

donsbad68

Immensely Educated
Jan 4, 2003
838
0
0
Oklahoma
Jul 12, 2006
#9
  • Jul 12, 2006
  • #9
gearset, bearing and alloy far as i know
 
8

89lxsport50

10 Year Member
Feb 25, 2003
550
5
39
Franklin Tennessee
Jul 12, 2006
#10
  • Jul 12, 2006
  • #10
My T-5 has 201,000 daily driven miles on it with no problems at all. So they will last if they are not abused. I wouldn't expect one to last too long behind a more powerful engine, or under racing conditions.
 

donsbad68

Immensely Educated
Jan 4, 2003
838
0
0
Oklahoma
Jul 12, 2006
#11
  • Jul 12, 2006
  • #11
stock wont g-force will
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jul 12, 2006
#12
  • Jul 12, 2006
  • #12
I plan to beat on it some. There is a track not too far from my house, so it will see some hard use.
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
Jul 12, 2006
#13
  • Jul 12, 2006
  • #13
If you have the money, do it right the first time. That way you won't be swapping trannies for a while. You'll thank yourself later.
With that said, it basically comes down to how much power and how hard you are gonna be on it. Some people can get away with things others can't. The old addage "what works for some doesn't work for others". I have been running the stock t-5 that has never been touched (other than fluid change) and it has over 180,000 on it and for the last year it has had the 347 and nitrous thrown to it.
 
D

Deleted member 87397

Jul 12, 2006
#14
  • Jul 12, 2006
  • #14
I'd definitely say do it right the first time. I converted to a T-5 from AOD a few months ago and I only had 500 miles on the T-5, (Which supposedly was upgraded to handle 350 hp) before I blew it up behind a 300 hp bolt on motor. Can anyone guess what broke? that's right 3rd gear. I shifted into 3rd at 5K and BOOM! I finally got it all pulled apart and all the teeth are missing from 3rd and the counter gear and the teeth chewed up all the synchros. I just finished installing my TREMEC TKO 600 on Friday and that thing is bad a$$. Very queit, very smooth, and very precise.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jul 12, 2006
#15
  • Jul 12, 2006
  • #15
Yeah unless you get a serious aftermarket kit for your T5 it won't hold. Save yourself the hastle and upgrade to a TKO 500 or 600. The 500 can hold 600 ft lbs of torque with the 26 spline input shaft. The 500 is geared really closely to the stock T5 gearing so take that into consideration. If you are putting down some power you might want to opt for the 600 right out because first and second won't be so short. Typical things that kill the T5 are good traction and hard shifts... which looks like what you are going to be doing. Stock 5.0s break T5s so take that into consideration.
Kevin
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jul 12, 2006
#16
  • Jul 12, 2006
  • #16
I started anouther thread about putting a blower on my 351, but it looks like it is going to cost too much. So I will do what I do best, 250 shot of nos.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jul 12, 2006
#17
  • Jul 12, 2006
  • #17
my car has had 6 t-5 put in behind my 351w. of course all these tranny's were junk yard specials. i currentally have a rebuilt world class t-5. it has held up to 2 summers driving so far. i am not easy on my car. it seems to be lasting. if you want reliability get a tko 600
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jul 12, 2006
#18
  • Jul 12, 2006
  • #18
Well this may sound dumb, but for the 600 will I need a shorter driveshaft.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jul 12, 2006
#19
  • Jul 12, 2006
  • #19
I am using my stock DS on my 5.0. You will need a C6 yoke though.
Kevin
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jul 12, 2006
#20
  • Jul 12, 2006
  • #20
Thanks, I am new to trans swaps. So I am just trying to get as much info as I can before I start.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

C
Drivetrain T-5 transmission issue
  • Ch3No2
  • Jul 11, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
497
Fox 5.0 Mustang Tech Jul 18, 2025
2000xp8
K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
528
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
S
4.6 spitting o-rings out of 2 injectors
  • skidad
  • Sep 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3 4
Replies
78
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Nov 4, 2026
skidad
S
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
533
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?