Will offroad X-PIPE fit 95 automatic?

o2project

New Member
May 20, 2004
12
0
0
I've been calling numerous places to find offroad X-PIPE and installation prices. Some places have told me an offroad X-PIPE will not fit an automatic, others have said its a direct bolt on.

One place has a Bassani offroad x-pipe direct bolt on for automatic for $239 and another place says they only make offroad h-pipe direct bolts on for the auto.

Need advice, as I will be doing this within the next day or two.

Two questions.

1). Can the offroad x-pipe fit the '95 gt automatic? Do I need the sensors? They say I dont need them.

2). These are my choices from who I have called in my area.
Bassani x-pipe w/o cats = $239
UPR h-pipe w/o cats = $159
BBK h-pipe w/o cats = $179

who's the one to go with???

thanks.
 
Yeah, I'm pretty positive an o/r (or one with cats) will fit your car fine. As far as sensors, you have to keep your O2 sensors, but you don't need the MIL eliminators like in the '96 and up ones. As far as choice of brand, the Bassani's probably the best quality, a little more hp with the x than the h, but there's nothing wrong with the other two. Good luck.
 
Sorry I meant x-pipe UPR.

What kind of sound is it exactly, a deep tone sound or a more raspy euro car sound?

I'm actually looking for a nice crisp little raspy sound because not many mustangs have that sound, most are running flows and generally produce the same sound, well in my area where stangs are they do.

And are yours O/R?

Thanks.
 
X pipe will give you a raspy higher pitched sound. Its really loud at idle and then NASTY when you open up the throttle.

I have the prochamber now and it is fairly loud at certain RPMs but relatively (to the X) quiet everywhere else. Plus it just sounds like every other Mustang/truck out on the street.
 
See thats what worries me.. my cherry bomb vortex mufflers sound loud as is, on stock exhaust.. I don't want my car to be uncontrollably loud, I live in a city with old retired people :notnice:

But forget 'em.. I'm still thinking of going with the O/R X.

Just don't know who to get...

UPR, Heddman, Bassani (kinda costly), BBK (everyone says they are crap?), or Mac.

ahhh...
 
i have the stainless basanni o/r x and its quiet at idle with my 3 chamber flows, like still loud enough so u know there is something there and only gets louder, when u step on it it gets pretty freaking loud for just a pipe, but it does do the raspy tin can thing at like 1000-1500 rpm. but i like it especially bc its stainless.