I'm wondering if I need to go with larger lines. It will get a 190 or 255lph pump, and it will have 30# injectors. Here's the combo.
351w, twisted wedge heads, tfs 351r upper/lower, undecided cam probably the tfs stage 2 or similar, and all the typical bolt-ons.
The way I see it, I'll need to be able to run this up to about 6500 rpm, I just want to make sure my system will support it before I put the engine in.
351w, twisted wedge heads, tfs 351r upper/lower, undecided cam probably the tfs stage 2 or similar, and all the typical bolt-ons.
The way I see it, I'll need to be able to run this up to about 6500 rpm, I just want to make sure my system will support it before I put the engine in.