• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

will this work

  • Thread starter Thread starter slow89
  • Start date Start date Aug 8, 2005
S

slow89

New Member
Aug 3, 2005
8
0
2
Aug 8, 2005
#1
  • Aug 8, 2005
  • #1
hey i have a b303 cam and 1.7 rockers and i was wondering will that work well with a turbo set up or should i just go with an f cam
 

6SpeedLX

New Member
Apr 5, 2005
100
0
0
Mass
Aug 8, 2005
#2
  • Aug 8, 2005
  • #2
i dont know much about cams but from what ive read and heard from many people is that there are much better choices out there than any of the alphabet cams. With a turbo setup i would go with a custom grind cam and not an off the shelf one.
 

Daniel50

New Member
Mar 30, 2005
716
1
0
Discovery Bay, CA
Aug 8, 2005
#3
  • Aug 8, 2005
  • #3
stock cam would work well with the turbo
 
S

slow89

New Member
Aug 3, 2005
8
0
2
Aug 8, 2005
#4
  • Aug 8, 2005
  • #4
anyone else have info on this
 

QDRHRSE

New Member
Dec 31, 2002
1,590
0
0
Palmdale, CA
Aug 8, 2005
#5
  • Aug 8, 2005
  • #5
....anything will work. The issue at stake is really how well will the B cam work vs the F. I think that the F would work much better. Alphabet cams are very good. Don't listen to to all the "haters".
 

shttygtstang

New Member
Jun 2, 2004
978
0
0
Aug 8, 2005
#6
  • Aug 8, 2005
  • #6
f cam for forced induction, x cam for nitrious is what they say soooooo.......

but i loved my f vs the stock good luck
 

85mcLaren

Member
Feb 26, 2004
45
0
7
Aug 8, 2005
#7
  • Aug 8, 2005
  • #7
B cam with 1.7s is not too far off from F cam. Don't recall the LSAs, but I don't think they are too far off (especially if you already have 1.7s).
 

shttygtstang

New Member
Jun 2, 2004
978
0
0
Aug 8, 2005
#8
  • Aug 8, 2005
  • #8
f cams duration is 226°/226° @ .050
b cam duration is 224°/224° @ .050

the duration is what makes it a better forced induction cam
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
463
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
380
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
T
Oil burning on my recently buil 302
  • The blk67
  • May 15, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
246
Fox 5.0 Mustang Tech May 15, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?