Windsor stroker motor help

[Stonerboys]

I'm looking to build a stroker motor out of my 351 windsor block. What is the best stroker motor to build? I was thinking about building either a 393, 408, or possibly a bigger stroker. I want to run anywhere from a 11.5 to 10.0 but not spend a fortune. Can anybody tell me where I can get a complete stroker kit, a cam, and everything else I need to build my motor. I have some high performance parts I was able to save from my last windsor that I scattered. That motor ran a best et of 11.8 before I blew it apart. Can somebody lead me in the direction I need to go as far as what size stroker to build and where I can get everything to build it. I appreciate any help that you can give me. Thanks in advance!

 

[Jack's95gt]

I'm in the same decision making process. I have bought everything for the stroker engine except for the stroker kit. It's a 408 or a 418 for me. I haven't decided if I'm putting a supercharger on it or a high compression N/A. I bought my last stroker kit from Dynoflo out in Henderson, NV. and they gave just what I asked for at a very good price.

351W roller block - Vic jr heads -Victor EFI intake -75MM throttle body stage 2 cam - 1.7 RR - BBK 351 swap headers - 351 rear sump oil pan - 351w efi dist.

 

[faststang90]

they have kits here and here are some other places. im doing a 427 but im going to a dart block.
chp sell them and so does this people. i was told a 393 would be a good size motor because u can still use parts off a 302

D.S.S. Rotating kit


Ford Performance Solutions


Bennett Racing 800.240.7223

 

[Rick 91GT]

I just finished a forged 408 for a customer of mine and he finshed out around $9,500 carb to intake with some extra goodies, and braided throttle cable, flywheel, etc.., it's ready to drop in and run...
10.65:1
AFR205 HYD ROLLER
SUPER VIC
750cfm HP Holley
Custom hyd roller cam from me
Made 538HP/508TQ on the engine dyno with a 2" header, he'll pick up power and tq when he uses the 1-3/4" swap headers he will run. Car makes over 460ftlbs at 3800rpm and 500ftlbs at 5000. Very nice streetable set-up that will go low 10's....the curves are awesome.

 

[YEAHLOH95]

man that thing looks good and makes great power .