Wiring Harness troubles

[Djstorm100]

is its possible to remove the main wiring harness through the firewall with out having to remove the dash and the heater/ac (big black box)?

Thanks

 

[88mouse]

The dash harness or the engine harness?

The engine harness you only need to take the box out that has the blower motor in it.

The dash harness you will have to pull the dash.

 

[Djstorm100]

The blower motor? I guess I'll have to look at the box when I get home

 

[88mouse]

the box on the pass. side has the blower motor for the A/C and heater in it on the back side.

 

[Djstorm100]

basically just unbolt the motor and take it of, pull the harness out and reinstall the blower motor

 

[88mouse]

Unbolt the box. There is two bolts on the left side where it meets the other box, then take the glove box down and there is one or two bolts in there, then the box will slide out. Takeing it in and out is a PITA tho.

 

[408gt91]

Its not that bad. its pretty easy. I did it once with a cheeseburger in my hand.