Working on an Import is a PITA!

NorCal66

New Member

Aug 12, 2003

334

0

0

Virginia Tech, Blacksburg, VA HOME

Mar 31, 2004

#1

• Mar 31, 2004

• #1

Just got done helping a buddy install $4000 in parts on his 300ZX TT...and let me say, after working on that thing I will never pay a mechanic a single cent to work on my car. I always took the engine bay space we have in our stangs for granted. Dropped the tranny put in a new clutch, flywheel, put the tranny back up (took about 3 hours to get the damn spline in there right). All new full-exhaust, a handful of sensors I have no idea what are used for, new intercoolers, and a lot of body work. Thankfully he works at a body shot and we had free access to all the best tools, lifts, etc
Picked up a LOT of patience.

 

2nd Mustang

Founding Member

Feb 24, 2002

2,488

0

46

Southern California

Mar 31, 2004

#2

• Mar 31, 2004

• #2

I had an 87 Pathfinder that was in that class too! When the starter went out, I couldn't see any way for me to change it at home using jackstands. Looked like the stock header had to be moved and the engine (V6) lifted to clear everything. It was almost $400 at the dealer. The oil change was another pain. The filter actually sat right over the starter a few silly millimeters away from the hot battery lead! Had to disconnect the battery just to do the oil change safely!

 

H

hindle

New Member

Jan 9, 2004

28

0

0

Flemington, NJ

Apr 1, 2004

#3

• Apr 1, 2004

• #3

300zx's are one of the hardest to work on. There is ZERO room.

 

pabear89

Active Member

Apr 15, 2003

2,126

0

46

High in the Hills of So Ca with the Voices in My H

Apr 1, 2004

#4

• Apr 1, 2004

• #4

They were Designed and Build by very small people.

Try working on a Datsun Roadster when your 6 foot tall.

You have to pull the motor to change the clutch.


PB

 

Edbert

Founding Member

Jul 13, 2002

3,548

32

109

Austin TX

Apr 2, 2004

#5

• Apr 2, 2004

• #5

It aint just imports bro. I helped a buddy put long tubes into his WS6-TA the other day. He used to be a pro mechanic and I can turn wrenches too, it took the two of us over 10 hours to get it done. I put long tubes on my '67 alone in about 50 minutes, and that was not hurrying.

 

skywalker

Member

Dec 22, 2003

733

0

16

Pensacola, FL

Apr 2, 2004

#6

• Apr 2, 2004

• #6

I used to work on imports exclusively (trust me, I still miss my CRX, just so much fun to drive not to mention the 50mpg it got!)

The room in there is definitely tight! It really takes alot of practice more than anything to get to where you can work on them as easily as a good old detroit muscle machine. Once you get used to it though, it's not that much different. Cam changes are a PITA on some of those engines though. Especially the VTEC ones.

Suffice to say though, I much prefer my '68 coupe. Always wanted one and darn easier to work on. If you're not used to working on a '98 civic, it'll take you hours to do something as simple as change the starter. It took 10 minutes my first time in my mustang, and 5 the second time (read "Car Caught Fire" for why I've done it 2 times in the 6 months I've owned it.) Much more simplistic design, and ALOT more room. The cars are about the same size too, so I'm trying to figure out where all that extra room is coming from.

Don't get me started on timing belts though. Oy vey...

 

zookeeper

Founding Member

Aug 25, 2001

3,415

63

109

Rogue River, Oregon

Apr 5, 2004

#7

• Apr 5, 2004

• #7

Work on imports? Hell, I always thought they were "maintenance-free" cars! Just use 'em, them dispose of them when they're worn out! Kinda like disposable razors, they serve a purpose, but why work on them?

 

Edbert

Founding Member

Jul 13, 2002

3,548

32

109

Austin TX

Apr 7, 2004

#8

• Apr 7, 2004

• #8

skywalker said:

The cars are about the same size too, so I'm trying to figure out where all that extra room is coming from.

Click to expand...

Part of it is structural, there is a lot more boxing going on since the metal is so thin (for weight savings) and then there's the crumple zones. Also turning an engine sideways and then putting the tranny under the engine instead of behind it and BAM, you're outta space. Funny that since most cars use thin sheetmetal for weight savings that an 04 mustang weights more than a 64 though isn't it?

LOL Zoo!

 

TazerRE

Founding Member

May 8, 2002

328

0

0

Bellingham, WA

Apr 9, 2004

#9

• Apr 9, 2004

• #9

I can change the starter in my Mustang in about 3 min if I really hurry and have my Ratchet Wrenches.

It took me about an hour and a half to change the starter in my mom's 91 Camry V6.

 

65fastback2+2

New Member

Aug 4, 2003

1,229

0

0

Louisville, KY

Apr 9, 2004

#10

• Apr 9, 2004

• #10

pulled the whole tranny from my dads vw, redid the clutch, put it back in in about 6 hours of actual time, and we had never done it before.

 

2nd Mustang

Founding Member

Feb 24, 2002

2,488

0

46

Southern California

Apr 9, 2004

#11

• Apr 9, 2004

• #11

65fastback2+2 said:

pulled the whole tranny from my dads vw, redid the clutch, put it back in in about 6 hours of actual time, and we had never done it before.

Click to expand...

Not fair. The old VW bugs were like tinker toys. I took the passenger seat out of my Baja bug, went to the engine shop, picked up a long block, laid it out on the floor pan and drove home. I removed the rear bumper cage, pulled the old engine, transfered all outside parts to the new long block, got it running and drove the core back to the shop in the afternoon.