• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Would it be worth the WORK!! SC'ed 3.8 in fox

  • Thread starter Thread starter TC93
  • Start date Start date Jun 8, 2006
  • 1
  • 2
Next
1 of 2 Next Last

TC93

Well-Known Member
Sep 11, 2000
2,075
1
57
Ellerslie GA 31807
Jun 8, 2006
#1
  • Jun 8, 2006
  • #1
Have a buddy that has an 89 super coupe T-bird parts car. We have been throwing around the idea of puttin the drive train in a fox body since we have a complete car for parts. But the biggest set back is, would it be worth all the work to do that???

Reason I want to do it because the SC bird he has is a 5 speed. I keep telling him lets do it but he really doesn't want to mess with all the work.. I think with supercharged 3.8 and a 5 speed would be a blast to drive. Specially if we could find a coupe with no power options..
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jun 8, 2006
#2
  • Jun 8, 2006
  • #2
Just remember that the most power you could get out of the M90 and all the other bells would be around 350. If you over boost the S/C the heads start to lift. A friend of mine has a Super coupe that runs faster than my car. I am sure he knows a lot about the motors.

I am sure it would be a fairly easy swap though. Just need to get some motor mounts from a 86 or lower V6 car.
 
S

Speeds8erM-1

Founding Member
Sep 6, 2000
1,240
0
36
Pensacola Florida
Jun 8, 2006
#3
  • Jun 8, 2006
  • #3
I had thought about doing this for a beater or something before, alot people do the blower swaps on 94-98 3.8 V6 cars or do the whole engine swap. Never seen one done in a fox though.
 

Bad92GT

The 5 Minute Plan Man
Jun 10, 2004
492
0
0
SC
Jun 8, 2006
#4
  • Jun 8, 2006
  • #4
not particularly.. you can get a good bit of power out of those m90s.. get it ported and go through the motor.. build it up.. mess with the pullys.. those m90s are already over driven from the get go.. they can supply the 16 lbs of boost neccesary
 

Tonys96Cobra

professional deer "mounter"
Oct 28, 2005
19
9
29
Syracuse
Jun 8, 2006
#5
  • Jun 8, 2006
  • #5
Sounds like a fun project! Just dont pull a 5.0 out and put a v6 in You should be able to find a 4 cyl donor for like 1500.
 

bryce93lx

Member
Jan 20, 2006
88
1
19
Luke AFB AZ
Jun 8, 2006
#6
  • Jun 8, 2006
  • #6
not too bad of a idea i have a stupid coupe that until recently would walk my stang, the sc tranny will not work, unless you have a monkey in the back seat to bang gears but a t-5 will bolt to a 3.8, if you are gonna do it ditch to stock intercooling, it is a crap setup, not sure you could retain it anyway, scoupes are under cooled over weight and have too much $!ht in the engine bay if you can solve those problems they are great, it's a hell of a sleeper though
 

TC93

Well-Known Member
Sep 11, 2000
2,075
1
57
Ellerslie GA 31807
Jun 10, 2006
#7
  • Jun 10, 2006
  • #7
Tonys89GT said:
Sounds like a fun project! Just dont pull a 5.0 out and put a v6 in You should be able to find a 4 cyl donor for like 1500.
Click to expand...


Oh no, wouldn't sacrafice a V8 car for the swap. Would be a 4 cylinder on older V6 car. I think it would be a cool little ride and probably good on gas. Be a nice little import runner,, then they couldn't complain,, " Well it's a V-8".
 

grey5.0beast

Cookies should never be DUNKED!!!
Aug 3, 2004
0
1
0
atl ga
Jun 10, 2006
#8
  • Jun 10, 2006
  • #8
that would be tight
 

JChalfan

Member
Nov 27, 2002
551
0
16
Bellevue, WA
Jun 10, 2006
#9
  • Jun 10, 2006
  • #9
I think it would be pretty cool. Since you have a complete parts car, if you can find a clean 4 or 6cyl fox for cheap, you could probably do the project without spending too much.

Maybe you can find a 5.0 car with a bad motor or no motor, then you would already have the 8.8 posi and V8 suspension.

I always thought those 5-speed SC's had a T-5, but if someone knows for sure they don't, then listen to them.


Jeff
 

Curse

Member
Apr 8, 2004
791
2
16
El Paso, TX
Jun 10, 2006
#10
  • Jun 10, 2006
  • #10
bryce93lx said:
not too bad of a idea i have a stupid coupe that until recently would walk my stang, the sc tranny will not work, unless you have a monkey in the back seat to bang gears but a t-5 will bolt to a 3.8, if you are gonna do it ditch to stock intercooling, it is a crap setup, not sure you could retain it anyway, scoupes are under cooled over weight and have too much $!ht in the engine bay if you can solve those problems they are great, it's a hell of a sleeper though
Click to expand...

I lovede my 94 SC, but it was too much money to keep it running, let alone modify it. They have tons of little problems, are a b i t c h to work on and most of the parts are obsolete.
 

Curse

Member
Apr 8, 2004
791
2
16
El Paso, TX
Jun 10, 2006
#11
  • Jun 10, 2006
  • #11
JChalfan said:
I always thought those 5-speed SC's had a T-5, but if someone knows for sure they don't, then listen to them.

Jeff
Click to expand...

All 5 speed SCs had Mazda M5R2s. 94-95 M5R2s had different gear ratioals.
 

JChalfan

Member
Nov 27, 2002
551
0
16
Bellevue, WA
Jun 10, 2006
#12
  • Jun 10, 2006
  • #12
Curse said:
All 5 speed SCs had Mazda M5R2s. 94-95 M5R2s had different gear ratioals.
Click to expand...

Good to know, thanks.

Jeff
 

TC93

Well-Known Member
Sep 11, 2000
2,075
1
57
Ellerslie GA 31807
Jun 10, 2006
#13
  • Jun 10, 2006
  • #13
Well if this swap does happen??? It will be stripped of all accesoriess.(I.E.. AC, PS and stuff) Under hood will be all business, and no luxeries...

But we did get the car to his house today.. It runs, just needs a fuel pump and battery. Borrowed a batt and shot some starter fluid in the intake and she ran for a few... HHmmMMMMmmm!!!!! Wee'll see what happens on this!?!?!??!?!
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jun 10, 2006
#14
  • Jun 10, 2006
  • #14
supersix motor sports will be a good site to check out
 

JChalfan

Member
Nov 27, 2002
551
0
16
Bellevue, WA
Jun 12, 2006
#15
  • Jun 12, 2006
  • #15
Keep us updated, I think it'll be pretty cool. I can just imagine that SC 3.8 in a stripped down old four-eye coupe. Even without doing any mods to the motor, it would make a light coupe move pretty darn good!

Jeff
 

QUICK91LX

Founding Member
Dec 7, 2001
968
3
39
New Jersey
Jun 12, 2006
#16
  • Jun 12, 2006
  • #16
i hate you all...

...i dont have the money for any more cars or projects, but i have been dying to do this very thing for a few years now...and this thread gets the wheels in my head turning again....

...uugggghhhh.....

please keep us updated!
 

z2o_what

Member
Mar 31, 2005
309
1
19
princeton, WV
Jun 13, 2006
#17
  • Jun 13, 2006
  • #17
Curse said:

I lovede my 94 SC, but it was too much money to keep it running, let alone modify it. They have tons of little problems, are a b i t c h to work on and most of the parts are obsolete.
Click to expand...

yep, i know the feeling...i've been thinking about changing the plugs in mine for almost 3 years know.
 
B

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe
Jul 13, 2003
2,433
23
48
Canada
Jun 13, 2006
#18
  • Jun 13, 2006
  • #18
With the gas prices on the rise, a supercharged 3.8L sounds nice Seriously though, pretty cool project and lots of potential. I'd do it!
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jun 13, 2006
#19
  • Jun 13, 2006
  • #19
Dear Myke86GT,
I was just reading that you wanted to try an M90 install on a donor foxbody. There maybe something, however, you haven't thought about yet.
Why not put the motor in a LT1 or LS1 camaro. That way you could have something fun to drive, exotic, and make a lot of mullet heads squirt milk out of their noses.

Thanks,

Dr. Strype
 

TC93

Well-Known Member
Sep 11, 2000
2,075
1
57
Ellerslie GA 31807
Jun 13, 2006
#20
  • Jun 13, 2006
  • #20
HoodStrype said:
Dear Myke86GT,
I was just reading that you wanted to try an M90 install on a donor foxbody. There maybe something, however, you haven't thought about yet.
Why not put the motor in a LT1 or LS1 camaro. That way you could have something fun to drive, exotic, and make a lot of mullet heads squirt milk out of their noses.

Thanks,

Dr. Strype
Click to expand...


Why would I want to mess up a good motor by puuting it in a camaro? J/K-n..
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
304
Other Auto Tech Mar 3, 2026
Noobz347
Rear Disc and Rims Offsets
  • TripleYellow
  • Nov 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 9, 2026
TripleYellow
Progress Thread 92RSQ As the name implies...
  • 92RSQ
  • May 30, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
496
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 4, 2025
92RSQ
New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
293
The Welcome Wagon Oct 19, 2025
Clutchfork
J
Help Figuring Motor Choice(Possible future turbo)?
  • jaygee15
  • Dec 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
628
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?