Yet Another How's My 331 Combo Thread

I'm currently in the process of building a na carb 331 for my 1965 Mustang.
First off, I already have the cam & headers & they were free, so that isn't changing (but will eventually get proper headers and custom cam).
I'm just looking for a fun streetable engine, nothing too crazy.

My Combo:

roller block Probed flattop 331 stroker kit 10.2:1 CR, romac ultra light balancer
Main girdle, Melling hv Oil pump, 7qt baffled pan
AFR 185cc #1422 58cc chambers with upgraded .600" valve springs
1.6 aluminum rr 7/16 stud, hyd lifters
TFS Stage 2 cam
Victor jr, holley 3310 750 vacuum secondaries manual choke carb,
3/8 fuel lines, Holley blue electric pump w/ regulator
rebuild stock distributor w/ petronix and 50,000 volt coil
1 1/2" 29" long headers 2 1/4" dual exhaust x-pipe 2chamber flowmasters.

I think I got it all, this will be mated to an AOD. Unsure about stall, but prob 2800-3200.

Flaws:
-Exhaust is too restrictive, but will upgrade that in future so that stays as is unfortunately.
- will a 110gph pump and 3/8" fuel lines be enough?
- Is vacuum sec necessary for my combo? what carb would you recommend?
- I know I need a custom cam, but it stays for now.


Any suggestions, comments? What do you think would be a good rev limit? Estimated hp/tq?

thanks for you input, very informative. Not only did you crituiqe my combo, but gave positive suggestions.

Would 1 3/4 header ans 3" exhaust be too much?

Any one else?