Whats your 1/4 mile and RWHP #s?

[Badlilstang]

Curious what your 1/4 mile and RWHP #s are. Also can you specify what tire you were on or even your 60ft would help. Thx!

 

[N8Miller]

12.7 @ 113, 1.977 60', ~ 380rwhp, drag radials.

 

[Jaswir]

14.9 @ 95.78 with a 2.4 60 foot

just full exhaust done, + whats in the sig with a BONE STOCK AOD

and if i had to guess on HP maybe 210 to 215 to the wheels

 

[25thmustang]

265 rwhp = 12.56 @ 105.8 with a 1.69 60' (26x9 Hoosier Slicks)

272 rwhp = 12.99 @ 107.6 with a 2.06 60' (245/45/17 Falkens)

 

[ryan218]

14.7 @ 97 with a 2.2x something 60 foot time.... street tires.

 

[N8Miller]

265 rwhp = 12.56 @ 105.8 with a 1.69 60' (26x9 Hoosier Slicks)

272 rwhp = 12.99 @ 107.6 with a 2.06 60' (245/45/17 Falkens)

that right there shows the importace of sticky tires...

good post!

 

[Quikstang]

On motor, my car put down 337 rwhp and went 12.702 114 mph w/ 1.98 sixty foot on BFG 265/50 - 15's street tires... 3150lbs weighed at the track with me in it. 88 GT 5 sp

 

[90_Red_LX]

13.8 @ 99mph, I would guesstimate 220whp, but I really don't know. It cant be that strong for full exhaust and intake only car. Hopefully 300whp will be attainable once all my parts arrive and the h/c swap is together.

 

[Blown83GT]

2.148 60'
[email protected] 1/8
12.56 @124.60

on 245/50/16 street tires.Guessing about 475 rwhp.

 

[alanw6]

420 rwhp, no times yet.

Definitely pulls very hard though.

 

[FSTRDNU]

390 rwhp
11.3 at 122
1.49 60"
10 holes w/ slicks

 

[Wade95]

Last summer, previous owner went 13.4/13.5 w/87GT GT40 crate motor. When I bought it, it had 249/283tq. Drag radials i think.

Just added Holley Systemax Kit, I'll advise later.

 

[Boss 351]

see my sig for the time, I think my RWD is between 170 - 180hp

 

[ALMOSTFINISHED]

543rwhp with no times yet. Just dynoed a few weeks ago. TFS track heat kit, stock short block, s-trim with 14 psi and meth injection

Nick

 

[Boss 351]

13.8 @ 99mph, I would guesstimate 220whp, but I really don't know. It cant be that strong for full exhaust and intake only car. Hopefully 300whp will be attainable once all my parts arrive and the h/c swap is together.

we have the same mph, I had such bad traction problems, I'm sure I could get a 13.5 out of my stock 5.0L

 

[brian15]

heres my car with a couple diff combos

edelbrock heads , stock cam , cobra intake , 4.10s
12.42 at 108

rpm 2 intake , crower cam , same heads , 3.27 gears and 245.40.17 street tires
3200lb weight
12.80 at 111

 

[ninety15.0]

14.8 @ 96 with 2.25 60'....that was bone stock motor and clutch, full exhaust and 3.73's. No times with new motor combo....290rwhp i'm guessing low 13's.

 

[Dean85GT]

13.4 @ 101 mph with only 188rwhp. When I dynoed the car they said it put out 270hp at the crank so I dont think it is calibrated correctly and they are aware of it. I just used it to set my jets and timing anyways.

 

[Jason 302]

60': 1.675
330': 5.061
1/8: 7.901
MPH: 86.01
1000': 10.363
1/4: 12.445
MPH: 108.25
Notes: Mickey Thompson Steet Slicks 26x10.5-15

60': 2.09
330': 5.528
1/8: 8.374
MPH: 85.71
1000': 10.826
1/4: 12.894
MPH: 109.23
Notes: Street tires 225/55-16

RWHP: 290.3 @ 5200rpm
RWTQ: 339.9 @ 3700rpm

 

[RS200]

14.399 @ 92.001 MPH, 1.978 60' on ET Streets. Stock dead motor w/ AOD.