HP gain question

[mikevm78]

Hey guys, so i helped a buddy at work put a bbk h pipe in his 94 gt. He has 2 chamber flows and this sunday im going to install a set of underdrive pulleys and bbk 1 5/8 shortys. Oh he also has a bbk cold air. What kind of HP numbers could he see when im all done with everything above installed? I know in 94 215hp was factory. Thanks! MM

 

[WANNA_BE_GT]

Somehow I remember Brian was making a little over 220 or something like that at the wheels with those mods. He should pull his heads and talk Stock5.0 to port them

 

[mikevm78]

So how close do you think he is to my car. both 5 spds. mine was 260 stock. and i have the header back exhaust with x pipe. cai coming in a day or two. would e beat me ? mine should put donw more that 220 right?

 

[saleenster]

I love these questions

 

[94v6GT]

So how close do you think he is to my car. both 5 spds. mine was 260 stock. and i have the header back exhaust with x pipe. cai coming in a day or two. would e beat me ? mine should put donw more that 220 right?

theres really only one way to find out

 

[mikevm78]

yea i know. Race him or Dyno.

 

[WANNA_BE_GT]

Stock, you would probably put down about 230ish to the wheels. With those mods and no tune, you are maybe around 245ish to the wheels. It'll be a drivers race because the 5.0 has better torque under the curve. He is probably a little lighter too, not by much but I am sure a little bit. Get some 4.10's and he will need a lot more mods to catch ya

 

[98V6 K.I.T.T.]

It will pretty much be up to the driver. In stock form I've seen people pull out 13.9-14.0 at very best from a 99+ GT 5spd. GT's with just some bolt ons will be in the mid to low 14's. With a catback, mid pipe and U/D you should be able to hit a high 13. I would definately give you the edge. The best I could muster was a 14.5 BONE STOCK, but my 60ft was a 2.2/2.3...I had the stock tires on it and were as you can figure getting shot. I know right now with my 315's I can get it down to the 1.9's which will bring that ET considerably lower especially with the extra power I will have.

I see you live in Arlington, we should meet up some time..I'm living in Marysville right now. I would love to have some more people with a similiar model/power level to race against.

 

[WANNA_BE_GT]

It will pretty much be up to the driver. In stock form I've seen people pull out 13.9-14.0 at very best from a 99+ GT 5spd. GT's with just some bolt ons will be in the mid to low 14's. With a catback, mid pipe and U/D you should be able to hit a high 13. I would definately give you the edge. The best I could muster was a 14.5 BONE STOCK, but my 60ft was a 2.2/2.3...I had the stock tires on it and were as you can figure getting shot. I know right now with my 315's I can get it down to the 1.9's which will bring that ET considerably lower especially with the extra power I will have.

I see you live in Arlington, we should meet up some time..I'm living in Marysville right now. I would love to have some more people with a similiar model/power level to race against.

We could always run again Curt

 

[Tylerb59]

haha.

We could aways run again, Corey.

 

[mikevm78]

UHHHHH

Speaking of people running. WHENS THE NEXT CRUISE COREY!! Mike want cruise HAHA

98v6 - heck yea we should run. havent raced the stanger yet and spanking ghetto ricers doesnt count.

 

[SMOKEDYA]

In my 95 i had all the bolt ons with some cam? Bassani O/R X bassani equal lenth headers and flow muffs. If i remember right i dyno'd 248 H.P and 278T.Q at the wheels. peace



john

 

[98V6 K.I.T.T.]

We could always run again Curt

Well if you didn't have your gears and some other mods I'd say hell yeah! But say this to me next spring and I'll be happy to take you up on the offer again.

Let me know Mike, unfortunately I wish the strip was still open.

 

[Tylerb59]

Next Saturday, October 6th is the last TnT at Bremerton.

 

[WANNA_BE_GT]

Well if you didn't have your gears and some other mods I'd say hell yeah! But say this to me next spring and I'll be happy to take you up on the offer again.

Let me know Mike, unfortunately I wish the strip was still open.

Whatchoo talkin' bout willis, I'm relatively stock "Relatively"

Tyler:
You know I am always up for some runs. It don't matter how fast you are I know you'll rape my poor N/A, relatively stock cobra, but it is all fun

 

[98V6 K.I.T.T.]

Whatchoo talkin' bout willis, I'm relatively stock "Relatively"

Tyler:
You know I am always up for some runs. It don't matter how fast you are I know you'll rape my poor N/A, relatively stock cobra, but it is all fun

Well...there is probably a greater chance of Tyler breaking, but then again Corey behind the wheel I'm not sure LOL.

Ehhh....I'd probably still run you Corey, I'd probably get my butt handed to me..but I'd try.

 

[WANNA_BE_GT]

Well...there is probably a greater chance of Tyler breaking, but then again Corey behind the wheel I'm not sure LOL.

Ehhh....I'd probably still run you Corey, I'd probably get my butt handed to me..but I'd try.

Man, I dunno, I drive pretty slow. Usually the speed limit and stuff Usually shift around 4k or something like that, nothing special

It's all in good fun