Mwahahahahah
I fixed it.
short video rough tune, bypass on blower held open.
View: https://youtu.be/vWi9m08ORjY
I fixed it.
short video rough tune, bypass on blower held open.
View: https://youtu.be/vWi9m08ORjY
Wooohooo !!!! You know what comes next.....
See the options are thereHmm...I do have a big laser cutter at work....
Ohhh C'mon!! You just can't say "you fixed it"........Lol I met a guy who can cut the plates out.... have his card in my pocket....
Intake can be purchased from jegs...then modified by your shop of choice... (or I sell the first one and buy a nice welder) blower from ebay...
It could happen.
I'm telling ya...you now have more than one opportunity to work for yourself, and tell " da man" that you're calling in sick........Lol I met a guy who can cut the plates out.... have his card in my pocket....
Intake can be purchased from jegs...then modified by your shop of choice... (or I sell the first one and buy a nice welder) blower from ebay...
It could happen.
Mwahahahahah
I fixed it.
short video rough tune, bypass on blower held open.
View: https://youtu.be/vWi9m08ORjY
Well you won't believe this but..... I forgot to put the check valve in the water meth line..... So when I primed it after I fixed the bad coils and wires.. it was sucking down copious amounts of water....Ohhh C'mon!! You just can't say "you fixed it"........
You fixed what?
Hmm... I may go for it I have proven it works... if I could source all the parts needed (maybe they find the blower) it could be a big seller..I'm telling ya...you now have more than one opportunity to work for yourself, and tell " da man" that you're calling in sick........
Forever.
You make things work that a lot of people would never even try,...but if you showed them a way,...or gave them an 'erector set ' to build their own......
You'd have a market opportunity to every guy that's ever had a 302/5.0 in anything.
And that's huge.
I make things work that a lot of people would never even try. But in my case, it wouldn't matter if I tried to sell complete engines...ain't nobody gonna put no stinkin' inline 6 cylinder in their Mustang.
And I have a market opportunity for one guy in the US, and one crazy guy from New Zealand.
Not so huge.
Ha ha! I'm not the only bonehead here that does brilliant stuff..Well you won't believe this but..... I forgot to put the check valve in the water meth line..... So when I primed it after I fixed the bad coils and wires.. it was sucking down copious amounts of water....
I think that would cause a serious missfire if it didn't need it don't you?
Soo...
I'm working an 18hr shift today.... 6am to midnight...
This weekend I am going to do some tuning.
At least you two are sit'n in the front, I'm stuck in the back row.yup..... once again we are sitting together on the short bus.
Skate boards are dangerous.....I'm hangin' on the back bumper....riding a skate board.
Ppffftt square.Skate boards are dangerous.....