Cobra flair. Forgot it when I did those pieces cause Im getting old.
Progress Thread “Rising from Ashes 13” 84 SVO build thread
- Thread starter 95steedamustang
- Start date
You see, you needed to have flares on the SVO to control all of that asphalt and gravel that it kicked up every time it launched. 
I'm just happy I was able to correctly identify the mystery part.
Finally getting a weekend off work…so Im working lol! But on the SVO. Should have some good updates
While the intermission music is playing:
Say, a guy has a 2.5" Cervinis hood but the underside was never painted. Let's say a guy picked up a replacement hood insulator and just wanted to finished the edges that the insulator doesn't cover.
Let's also say that the guy wants to rattle can the project in the garage.
What stuff should he use from start to finish? I'm thinking flat-black or semi-gloss.
I mean, the guy is.
Say, a guy has a 2.5" Cervinis hood but the underside was never painted. Let's say a guy picked up a replacement hood insulator and just wanted to finished the edges that the insulator doesn't cover.
Let's also say that the guy wants to rattle can the project in the garage.
What stuff should he use from start to finish? I'm thinking flat-black or semi-gloss.
I mean, the guy is.
Red scotch bright scuff pad, give it a good overall scuffing by hand. Then SEM trim black. 3-;4 light coats. Give you a good matte black finishWhile the intermission music is playing:
Say, a guy has a 2.5" Cervinis hood but the underside was never painted. Let's say a guy picked up a replacement hood insulator and just wanted to finished the edges that the insulator doesn't cover.
Let's also say that the guy wants to rattle can the project in the garage.
What stuff should he use from start to finish? I'm thinking flat-black or semi-gloss.
I mean, the guy is.
Got into the engine bay and wire hide. Found some rust behind the hood hinges (pretty typical) the driver side metal is pretty well gone. But not a big deal for me to repair. More fun to come this weekend
DadLife0724
Active Member
Spent a few hrs on the radiator intercooler setup and fixed the jacked up way it was installed.
Time for an update…Spent a few hrs on the radiator intercooler setup and fixed the jacked up way it was installed.
Bill
Per Bill’s request.
Gave the ole SVO a little drop and put some panels back on. Moved over to the clean room for a little cure out time
Are those the original wheels? They look good!Per Bill’s request.
Gave the ole SVO a little drop and put some panels back on. Moved over to the clean room for a little cure out time
Bill
They gave a turbo 4 banger 5-lugs before GTs with V8s? 
(*&%(*&^)*((&$&)(*&_
(*&%(*&^)*((&$&)(*&_
Fall on that. Im also smoothing on the factory dash pad and will either recover it in leather or use it as a plug to do a carbon version.
