Search results

  1. doobsstang

    Car won't start...

    Done all the usual things. Plugs, plug wires, cleaned MAF, changed oil, and charged battery. Had the car sitting outside covered during the winter. When I try to turn it over it starts for a few seconds with a rough idle and then dies. If I try to give it a little gas it dies right then...
  2. doobsstang

    Wrong starter?

    I am finishing up my AODE to T5 swap and I ran into an issue. I am reinstalling the starter and the teeth on the starter do not connect with the teeth on the flywheel. Is this normal? Or do I need to get a starter for a T5?
  3. doobsstang

    Wheere is the computer?

    Can someone please tell me where the computer is in our cars??? I have been looking for it for about 30 minutes, and I cannot find anything in my Chiltons. Thanks!!!
  4. doobsstang

    T5 Clutch Pedal Assembly

    I am in the middle of doing my AODE to T5 conversion and it seems MPS sent me the wrong pedal assembly. I am not certain so I thought I would ask StangNet for some help. The old assembly I took out has a rubber hose connected to the brake pedal. Looks like some sort of plunger switch...(not...
  5. doobsstang

    Aode Fill tube Help!

    I am doing an AODE to T5 swap. I am about to get the AODE out of the car but I cannot get the AODE fill tube out. Any suggestions on how to do this? I have two more bolts connecting the AODE. Does it screw off? Any help is appreciated. Thanks.
  6. doobsstang

    Strange Noise

    I have been trying to find the cause of this noise for about a year. It happens somewhere near the front left tire. When I hit bumps in the road it rattles, like metal on metal rattling. When I push on the brakes it goes away. Can anyone point me in the right direction?
  7. doobsstang

    Rear main seal type for Stroker

    I am going to buy a 347 stroker kit, maybe this one: http://store.summitracing.com/partdetail.asp?part=SCA%2D1%2D94165&autoview=sku and I see that it is for a 2 piece rear main seal. The block I have has a one piece rear main seal. Should I look for a kit that is for the one piece style...
  8. doobsstang

    AODE to T5 Swap

    I am wondering if I should do it myself or bring it to a shop. I have never done anything like this before and not sure if I will be able to understand everything that needs to be done. I don't really want to bring it to a shop because of the cost of labor. I am just not sure what I should...
  9. doobsstang

    Looking for...

    1994-1995 5.0L: T5 Bellhousing Flex Plate Pedal Assembly T4M0 Computer T5 Wiring Harness Dust Cover Any help would be appreciated. PM me if you have available to sell. Thanks :SNSign:
  10. doobsstang

    94 Cobra T5

    Is $500 shipped a good price for a 94 Cobra T5 with 40k miles on it?
  11. doobsstang

    T5 Swap Kit - Good Price?

    I am looking to do a AODE to T5 swap in my car soon. I have been trying to find a swap kit like this one but not sure if the price is good or not. The price is $1895 for everything to do the swap. Here is the link: http://www.mpsautosalvage.com/products/list.cfm?TypeID=40 Let me know...
  12. doobsstang

    Upgrade to auto?

    I am looking at upgrading my auto instead of doing a T5 swap. For you guys with upgraded autos, what did you do? I was looking at Lentech Automatics, specifically the AODE/4R70W Street Cruiser. Any suggestions for stall and torque converter? I am going to put in a 347 soon and wondering if...
  13. doobsstang

    347 Stroker Kit! Where to buy?

    Anyone have any good suggestions? I have looked around the net for awhile and found some good places. I just would like some more suggestions and advice when buying a kit. Where did you buy yours and why? Answers to those kinds of questions will help me a lot. Like I said I am going with a...
  14. doobsstang

    What should I do???

    Well it is winter time and the Mustang is garaged and ready to be worked on. Now I just have to figure out what I want to do. Help me out a little with some suggestions. 1. I could rebuild the engine and do a heads/ custom cam/intake swap, AODE to T5 swap, suspension, and all the other...
  15. doobsstang

    Good Stroker Article

    I have been researching and learning how to build my own 347 Stroker and found this site that I thought may be useful to anyone in the same situation. Take a look and tell me what you guys think. http://www.hotrod.com/howto/69883_stroke_any_engine/
  16. doobsstang

    Tutorials or books?

    Are there any good books or tutorials about the step by step process of building a 331 or 347 stroker? I would like to do it myself so it is my ass if I screw up, plus it will be a great learning experience. Thanks. :SNSign:
  17. doobsstang

    WTF...

    Well I had finally gotten my AODE all fixed up where it wasn't leaking any fluid and I get a check engine light today. I pulled the codes and got these: 628 - Excessive converter clutch slippage 657 - transmission oil temperature is excessive. I am now not getting O/D. Anyone know...
  18. doobsstang

    347 Combo

    I am currently trying to make a combo that will make about 400rwhp. I want it to be a 347 Stroker. Any suggestions of what kinds of heads, intake, or cam? I am thinking about AFR 185s but how much more power will 205s give me and with those will it be good for the street? I am kind of lost...
  19. doobsstang

    Can a 306ci create 400rwhp?

    I am thinking about getting an engine build by RNH Performance and wondering if 400rwhp is an attainable goal with a 306ci...Thanks. :SNSign:
  20. doobsstang

    What Transmission?

    My AODE is crapping out on me and I am going to put a manual tranny in. I am wondering which tranny will be the best for it. Not sure about putting a T-5 in since I plan for a lot of mods and a lot more hp so which would be the best? Thanks.:SNSign:
Top Bottom
Back
Forums
Menu